EcoNitro OBD2 Fuel Saver Chip Tuning Box Plug & Drive Pour BenzineDiesel Car

Certification:CE,None

Full Chip Fuel ECOOBD2 NitroOBD2 Chip Tuning Box ECO OBD2
Nitro OBD2 For Diesel & Benzine Engine Plug&Drive

Plug and Drive EcoOBD2 Economy Chip Tuning Box for Diesel Cars 15% Fuel Save
Certificates : CE / FCC / RoHS
It
works based OBD2 protocols as remaping the Car's computer ECU. After
driving 200 km road total, EcoOBD2 adjusts itself to the car, according
to the drivers' habits and always keeps remaping the ECU to save fuel
lower and immission.
What does EcoOBD2 make
According
to your driving habits, EcoOBD2 makes new map in the car's computer
ECU for the vehicle's lower fuel consumption. As you driving much more
KM/Mile, EcoOBD2 renews the map and adjusts itself to match your car
perfectly for more fuel saving.
What is EcoOBD2 Chip Tuning Box
EcoOBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to decrease the fuel consumption of your car.
When
it plugged into OBD2 connector, EcoOBD2 receives the information from
the car computer ECU. With the received data from ECU,
EcoOBD2
adjusts the boost pressure, quantity of fuel, injection timing and
pressure to decrease the fuel consumption of your car.
EcoOBD2 Chip Tuning Box does not exceed the manufacturer requirements. It works only within the tolerance of the engine.
EcoOBD2 does not damage the engine and the car computer ECU or not cause any negative effects to the car factory setting.
EcoOBD2
does not change any of the settings permanently. To turn back to the
car's original settings, just unplug EcoOBD2 from OBD2 connector.
EcoOBD2 is very easy to use
Plug EcoOBD2 into OBD2 connector of your car. And turn the ignition on for 30 seconds. And Turn the engine on.
EcoOBD2 settings are optimal and the best for your car. Even the parameters are different for each vehicle,
there might not be a need to make an additional adjustment.
EcoOBD2 will recognize your vehicle and your driving habits after around 200 km/150 miles driving,
and then EcoOBD2 adjusts itself to match your car perfectly.
EcoOBD2 works on the basis of changing the signal form ECU. As a consequence, it changes the whole injection map
The
main difference between EcoOBD2 Chip Tuning Box and Remapping tuning
methods is that EcoOBD2 Chip Tuning Box is easily removable, and after
unplug you go back to the factory settings. EcoOBD2 is the cheap and
safe type of tuning. Remapping is a permanent change to your car.
This
is the expensive tuning and you cannot remove it. EcoOBD2 is equipped
with the engine protection function and 100% safe for your car engine.
EcoOBD2 produced on the printed circuit board in SMD technology. EcoOBD2
Chip Tuning Boxes are high quality.
EcoOBD2 Economy Chip Tuning Box Installation and Calibration
1 - Pull the Car Key out from the ignition.
2 - Find OBD2 connector(*) in your car and Plug in EcoOBD2
3 - Insert the key into the ignition and twist the key to the first stage. (Do not start the car)
4
- Press the reset buttom for about 5 sec. After releasing the buttom,
just wait for a while about 30-54 sec. (EcoOBD2 will communicate and
establish connection with ECU)
5 - Start up the engine.
6
- EcoOBD2 will recognize your vehicle and your driving habits, after
around 200 km/150 miles driving and thus EcoOBD2 will adjust itself to
match your car perfectly for more fuel saving.
Does your car have OBD2 connector
On-Board
Diagnostics, or "OBD," is a computer-based system built into all 1996
and later light-duty vehicles and trucks, as required by the Clean Air
Act Amendments of 1990. OBD systems are designed to monitor the
performance of some of an engine's major components including those
responsible for controlling emissions.
OBD2 necessarily for cars:
- Sold after January 1, 1996 in the USA
- Sold after January 1, 2001 in the European Union
- With diesel engine sold after January 1, 2003
Where located OBD2 connector in your car
1 Driver's side, underneath dasboard, in the area under the steering column,
2 Driver's side, underneath dasboard,between the driver-side door and steering column area
3 Driver's side, underneath dasboard, between the steering column area and the center console
4 Driver's side, dashboard instrument/gauge area, between the steering column and center console
5 Driver's side, dashboard instrument/gauge area, between the driver-side door and steering column
6 Center console, vertical surface left of vehicle centerline
7 Center console, vertical surface right of vehicle centerline or on passenger side of center console
8 Center console, horizontal surface in front passenger area.
Package content:
1pc x EcoOBD2 Chip Tuning Box Interface
1pc x User Manuel English

Item No.	SE119	SE119-B	SE120	SE120-B
Color	Yellow	Red	Green	Blue
Brand	NitroOBD2	NitroOBD2	EcoOBD2	EcoOBD2
Certificates	CE / FCC / RoHS	CE / FCC / RoHS	CE / FCC / RoHS	CE / FCC / RoHS
Vehicle Coverage	Benzine Cars	Diesel Cars	Benzine Cars	Diesel Cars
Additional Function	Up to 35% more power Up to 25 % more torque	Up to 35% more power Up to 25 % more torque	Up to 15% fuel savings	Up to 15% fuel savings
OBD2 Necessarily	Sold after January 1, 1996 in the USA Sold after January 1, 2001 in the European Union With Benzine engine sold after January 1, 2003	Same	Same	Same
Computer Needs	No	No	No	No
Installation	plug it into the OBD2 connector of cars	plug it into the OBD2 connector of cars	plug it into the OBD2 connector of cars	plug it into the OBD2 connector of cars
Function	Chip Tuning	Chip Tuning	Chip Tuning	Chip Tuning