Brand Name:icchipcn.com
Type:Serial Cable
Certification:CE,RoHS
Package:No
Products Status:STOCK
Model Number:UG-733
Chip:FTDI
Connector:USB to DB9
Color:Black
Warranty:One Year
Material:PVC jacket+bare copper
System Support:Win10/8/7/Mac/vista/android/linux
Pin Assignment:1-DCD, 2-RXD, 3-TXD, 4-DTR, 5-GND,6-DSR,7-RTS,8-CTS,9-RI
Feature 01:usb to db9 cable
feature 02:usb rs232 db9 cable
feature 03:db9 cable
feature 04:usb to rs232 db9
feature 12:db9 serial port
feature 05:ftdi db9
feature 06:usb to rs232 db9 cable
feature 07:db9 computer cable
feature 08:db9 rs232 converter cable
feature 09:usb to com port cable
feature 10:usb to db9 serial adpater cable
feature 11:ftdi db9 serial adapter

USB to DB9 RS232 Serial Adapter Cable 9 Pin Male to COM port FTDI Chip computer PC Converter Cable Support Win10/8/7/mac/vista 3.2ft

USB RS232 adapter cable usb rs232 serial cable overmolded

full pinout for POS, scanner, barcoder, modem, etc

Support Win 7, Win 8, 8.1, 10, Android, Mac, Linux etc

It can make your mobile, laptop, notebook, portable pc with a extenal COM port!!!

FT232R usb rs232 adapter cable is 1.0mtr

FT232RL+ZT213 chip

USB2.0 RS232 to DB9 full pinout

DB9 male pinout:1-DCD, 2-RXD, 3-TXD, 4-DTR, 5-GND,6-DSR,7-RTS,8-CTS,9-RI

USB RS232 COM port converter cable

USB serial adapter cable

usb-COM232 adapter cable

USB RS232 DB9 male cable

USB specification 2.0 compliant, full speed(12Mbps)

USB suspend states supported via SUSPEND pins

All handshaking and modem interface signals

Data formates supported: Data bit: 5, 6, 7, and 8, Stope bits: 1, 1.5. and 2.

Parity: odd, even, mark, space, no parity

Baud rates: 300bps to 1 Mbits

576 byte receive buffer; 640 byte transmit uffer

Hardware or X-On/X-Off handshaking supported

Even character support

Line break transmission

RS232 standard signal

24/28AWG with braid for shielding, OD=4.0mm

Update serial PLC, modem to usb, bar coder reader, scaner, etc

Compatible PC serial power level

Support Windows 7/Win8, Win 8.1/10/XP/9X/2000, Linux,Mac,etc

With DB9 full pinout:

About FT232RL

The FT232R is the latest device to be added to FTDI s range of USB UART interface Integrated Circuit Devices. The FT232R is a USB to serial UART interface with optional clock generator output, and the new FTDIChip-ID security dongle feature. In addition, asynchronous and synchronous bit bang interface modes are available. USB to serial designs using the FT232R have been further simplified by fully integrating the external EEPROM, clock circuit and USB resistors onto the device.

The FT232R adds two new functions compared with its predecessors, effectively making it a "3-in-1" chip for some application areas. The internally generated clock (6MHz, 12MHz, 24MHz, and 48MHz) can be brought out of the device and used to drive a microcontroller or external logic. A unique number (the FTDIChip-ID ) is burnt into the device during manufacture and is readable over USB, thus forming the basis of a security dongle which can be used to protect customer application software from being copied.

• Single chip USB to asynchronous serial data transfer interface.

• Entire USB protocol handled on the chip - No USB-specific firmware programming required.

• UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.

• Fully assisted hardware or X-On / X-Off software handshaking.

• Data transfer rates from 300 baud to 3 Megabaud (RS422 / RS485 and at TTL levels) and 300 baud to 1 Megabaud (RS232).

• In-built support for event characters and line break condition.

• New USB FTDIChip-ID feature.

• New configurable CBUS I/O pins.

• Auto transmit buffer control for RS485 applications.

• Transmit and receive LED drive signals.

• New 48MHz, 24MHz,12MHz, and 6MHz clock output signal Options for driving external MCU or FPGA.

• FIFO receive and transmit buffers for high data throughput.

• 256 Byte receive buffer and 128 Byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.

• Adjustable receive buffer timeout.

• Synchronous and asynchronous bit bang mode interface options with RD# and WR# strobes.

• New CBUS bit bang mode option.

• Integrated 1024 bit internal EEPROM for I/O configuration and storing USB VID, PID, serial number and product description strings.

• Device supplied preprogrammed with unique USB serial number.

• Support for USB suspend / resume.

• Support for bus powered, self powered, and high-power bus powered USB configurations.

• Integrated 3.3V level converter for USB I/O .

• Integrated level converter on UART and CBUS for interfacing to 5V - 1.8V Logic.

• True 5V / 3.3V / 2.8V / 1.8V CMOS drive output and TTL input.

• High I/O pin output drive option.

• Integrated USB resistors.

• Integrated power-on-reset circuit.

• Fully integrated clock - no external crystal, oscillator, or resonator required.

• Fully integrated AVCC supply filtering - No separate AVCC pin and no external R-C filter required.

• UART signal inversion option.

• USB bulk transfer mode.

• 3.3V to 5.25V Single Supply Operation.

• Low operating and USB suspend current.

• Low USB bandwidth consumption.

• UHCI / OHCI / EHCI host controller compatible.

• USB 2.0 Full Speed compatible.

• -40