Type:Logic ICs
Condition:New
Model Number:ZVS
Power:1000W
Note: This paragraph It can only be used for DIY players to quench and annealing small parts for a short time. Non-professional modules, such as industrial products, are not photographed.
Induction Heating 1KW Finished Product without Tap ZVSIt's ready to use.
First,input voltageDC 12V~40V
Maximum input current 50A (short time)
Recommended input voltage rangeDC 24V~36V
The power used in heating must be large enough!
12VIn power supply, the current should be greater than or equal to20A;24VWhen power is supplied, the current is greater than or equal to30A;36VWhen power is supplied, the current is greater than or equal to50A This is a reference, the actual current size is related to the actual use.
As far as possible, use a protective power supply, which is small and unprotected, instead of switching power supply.
Do not use batteries, battery power supply!
The working voltage is ensured at11VAbove, note: It is the working voltage, that is, the input voltage when connected to the coil or heated object; it is not the voltage when the power supply is idle.
Two.Long-term use must use copper pipe with water-cooling! ____________
Copper pipe with diameter of 10 mm can be installed on the output copper column. Copper pipe with diameter less than 4 mm can be welded on the copper clamp and fixed on the copper column. The diameter less than 2 mm can be connected to the output terminal.
Three.If the heating power is less than 300W, you can use the other models in our shop.
This one is mainly used for heating. If you push a high-pressure bag, please choose some other ones in our shop. General high-voltage packet power < 200W, a large power is easy to damage!
Fourth, the use of this board requires a certain practical ability and relevant knowledge. If you can't even use soldering iron, and the positive and negative poles of the power supply will not be separated, it is recommended not to shoot!
PCB board size: 165.1*112.41*1.6mm
