Type:Voltage Regulator
Condition:New
Intelligent type:Other
Shipping list (as shown below): a single channel Bluetooth relay with a shell.
Product specification
First, the functional characteristics:
Oneworking voltage: power supply 1, 6-25V DC; power supply 2, 5V DC
Twoworking current: standby 11MA, relay on 45MA (test condition 12V)
ThreeBluetooth V2.1+EDR, Class 2
Fourunlicensed 2.4GHz-2.48GHz ISM band
5 through the Android APP Bluetooth to send commands to control the relay on and off (we provide Android Bluetooth APP, you can also use your own APP to control the relay, sending simple commands to control), can also be through an external trigger signal control relay.
6 point moving self locking relay "open", the relay "off" 4 instructions
7 external trigger input, photoelectric isolation switch, low pulse input.
8 size (including shell) 81*50*32
9 weight: 66 grams
10 maximum load: 10A/250VAC, 10A/125VAC, /30VDC 10A, /28VDC 10A, /12VDC 10A
NOUN interpretation:
NO : Relay normally open contact
COM: Relay common contact
NC : Relay normally closed contact
"Open" :NOConnectCOM, NCTo break offCOM
"Close" :NOTo break offCOM, NCConnectCOM
Move Mobile terminal input"A0"(B0/C0/D0Also like,Relay "open", time delay1Seconds after the "off""
Self locking Mobile terminal input"A1",Relay "open", re input"A1", relay "off"", And so on
External trigger input: low pulse, pulse width is greater than200Millisecond After reset is a point moving mode, when the instruction input by "self lock, open, close" one of the three instructions, into a self locking mode. Instructions and external triggers can be composed of flexible control methods.
Instruction (Format: string, case insensitive)
Instruction function instruction
A0 "point" mobile phone terminal input "A0", relay 1 "open", delay after 1 second "off""
A1 "self locking" mobile terminal input "A1", relay 1 "open", once again enter "A1", relay "off""
A2 "open" NO1 off COM1, NC1 connection COM1
A3 "close" NO1 connection COM1, NC1 disconnected COM1
A4 "open" NO1 off COM1, NC1 connection COM1
BluetoothAPPOperation:
Bluetooth password:1234
Bluetooth baud rate:9600BPS
The first time using a mobile phone connected to the Bluetooth connection2-3Time to succeed, once again connected to a successful.
Typical applications:
1 Power Supply6-25V DCLoad6-25V DCCircuit, wiring as shown below. Load"LOAD"May beLEDLamps, fans, motors, etc.6-25V DCequipment
2 Power Supply6-25V DCLoad1-48V DCperhaps85-265V AC, wiring as shown below. Load"LOAD"May beLEDLamp, fan, motor,Pumps, etc.1-48V DCperhaps85-265V ACequipment
3 Power SupplyDC 5VLoad1-48V DCperhaps85-265V AC, wiring as shown below. Load"LOAD"May beLEDLamp, fan, motor,Pumps, etc.1-48V DCperhaps85-265V ACequipment
4 Power SupplyDC 5VLoad5V, wiring as shown below. Load"LOAD"May be SinglechipARMDevelopment board, small motor, etc.5Vequipment
