Type:Logic ICs
Condition:New
Model Number:ZVS
Color classification:Driving Plate with 48V Copper Tube and Copper Tube
The maximum power of ZVS induction heating product is the latest design of our shop.
2000 W, adoptedSuper PCB layout design and super heat sink, heat dissipation
Good power, big selfWith cooling fan interface, it can also be used as Tesla discharge and Mark.
THIS GENERATOR, HIGHVoltage inverters, etc.
This induction heating circuit uses 12-48VLow Voltage DC Power SupplyThe maximum current is 50A, the maximum current is 50A.High power 2000W. It can work continuously under good heat dissipation conditions. Because of its moderate power, it can be used for DIY play.
Give smallHardening, annealing and other heat treatment can also be combined with graphite crucible melting.Gold,Silver,Copper,aluminumIt can be heated uniformly and quickly, and it is very convenient.
In this test, the maximum power is close to 2000W and the maximum current is 50A. This product is in
It can work continuously for several hours under good heat dissipation conditions.
[Product parameters]
Product size: 120 mm * 240 mm
Input voltage:12V-48Recommend36V or above
Power requirements: less than12VEqual to or equal to10A 15VAboveMore than 20A
Maximum power: 2000W
Maximum current: 50A
When induction heating power supply recommended to use more than 48V50A switching power supply, Taobao can find a lot of second-hand.The switching power supply for goods communication is cheap and of good quality. If the power supply is above 24V, the power supply should be above 20A.The greater the voltage, the greater the current, the greater the heating power.
The faster the heat rate is
[Baby highlights and features]
[1] The heating plate is made of 240*120 mm military grade PCB, which has stable performance.
[2 The power line is covered with copper, which can increase the current and reduce the heat.
[3] It is better to use super-large and high-power radiators for heat dissipation.
[4]Three M4 copper columns are connected in parallel at the output end, which can be used for other outputs such as high voltage packages.
[5]Six IRFP260 and 12 capacitors are used in parallel resonance, which has high power and high efficiency.
[Buyers must see/pay special attention to
[1] The power of induction heating is very high, besides the heating of plates and components, the heat of copper tubes is also very large. Buyers can own water cooling and heat dissipation systems, buy a small pump and a rubber pipe with an inner diameter of about 2 meters. Buyers can also buy matching water pumps in packages.
[2]When using switching power supply, we must pay attention to it, because high-power switching power supply generally has the function of slow start, that is to say, it rises slowly at the beginning of the output voltage, and if the voltage rises to 10V, the induction heating circuit will not be connected because of the insufficient voltage.
Vibration, so that two MOS transistors at the same time turn on and burn components, so it is necessary to switch on the power supply voltage stability and then access the induction heating circuit;
[3] When heating metal objects, try not to heat the metal with too large volume, otherwise it may be dangerous to overload due to power overload; when using, it is better to add a 50A fuse or ammeter and air switch, which can be matched in the package.
