2800W infrared temperature control integrated induction heater AC110-220V input overload protection foot switch LCD screen

Brand Name:icchipcn.com
Condition:New
Type:Logic ICs
Model Number:2800W
Supply Voltage:AC110-220V
? ? ?New version! More features! !! Automatic protection! Overload setting! Foot switch! intelligent control!?? ? ? This product is a small power induction heater that can be directly plugged into AC110V-220V power supply.It is mainly used for heating and quenching of small ferrous metal materials. With the matching 70mL graphite crucible, the maximum temperature can reach 1600 degrees Celsius. Iron, copper, gold, silver, aluminum, etc metal.??One:Product Features and Functions:1. With integrated metal casing design, easy to use and carry, good heat dissipation;2. Integrated power supply to avoid complicated wiring;3. The heating coil is wrapped with high temperature resistant thermal insulation material to prevent short circuit during heating, and the heating coil can be removed and replaced to customize a specific heating coil;4. Integrated internal water-cooled circulation system to prevent the heating ring from overheating;5. Two high-power fans at the top for heat dissipation;6. Add digital current overload protection switch, once the overload trips the protection circuit in time;7. The large LCD screen displays various operating parameters of the system, including voltage, current, power, motherboard temperature, etc., and can be easily switched between Chinese and English by one key. The maximum allowable current can be set through the power meter. When the maximum operating current is exceeded during work Enter overload protection mode.8. Provide 0-660 degrees or 0-1000 degrees infrared temperature controllable version.9. Metal key switch, and add foot control to facilitate use in different scenarios.10. Water shortage protection for water cooling system.?? Two: product parameters1. Dimensions: length, width, height, 380 * 140 * 210 (unit: mm);2. Heating ring size: 70 * 60 * 73 (inner diameter * outer diameter * height);3. Input voltage: AC110-AC220V 12A;4. DC working voltage: 48V (internal power supply voltage is the displayed voltage);5. Maximum DC working current: 58A6. Direct heating of metallic iron with a maximum temperature of 700-800 degrees Celsius7. Use crucible maximum temperature 1600 degrees Celsius8. Package weight: 10KG9. Product net weight: 6KG10Packing size: 50cm * 40cm * 35cm?Three: matters needing attention1. The startup sequence should be followed by turning on the main power switch first, wait a few seconds, and then see that the fan and water pump are working normally. After the voltage and voltage are displayed as about 48V, you can turn on the induction heating switch on the back. Do not operate it incorrectly, otherwise it will directly Burned out motherboard and unprotected. Turn off the heating switch before turning off the power switch. If it is not used for a period of time after shutdown, the main power should be turned off after turning off the heating switch for one minute, so that the cooling system will cool the system and increase the service life;2. Water cooling and air cooling must work at the same time when working. If any of them does not work, you should immediately disconnect the power supply and contact the manufacturer for solutions;3. If conditional water cooling is available, cold water and hot water can be directly drained instead of circulation, so the heat dissipation effect is better;4. There should be more crucibles for long-term use of crucibles. High-temperature heating of graphite will react with oxygen to generate carbon dioxide and gradually consume the crucibles;5. Pay attention to the changes of various parameters of the display, especially the voltage and current, and the temperature of the motherboard, and disconnect the power immediately if any abnormality is found.6. When using at high power, it is normal for the noise of the cooling system to be relatively large.Panel description


① Master power switch?②AC110V-AC220V input interface?③ Infrared temperature sensor interface?④Water-cooled water pipe?⑤Main display?⑥ Overload indicator?⑦Heating indicator?⑧Output interface?⑨Continuous heating switch?⑩Reset switch??Foot switch interface??Fuse??Thermostat??Cooling fan