Condition:New
Type:Logic ICs
▲Compatible with USB2.0
▲ADUM3160 isolation voltage: 2500V
▲Power supply: taken from the USB port of the computer host, support ∪SB control transmission, batch transmission, interrupt transmission, synchronous/isochronous transmission
▲Power module isolation voltage: 1500V
▲ Output power B0505S power is 1W
▲Use environment: -40℃ to 85℃
▲Support ∪SB low-speed 1.5Mbps and full-speed 12Mbps, does not support pure high-speed equipment
Working environment with strong electricity and strong interference
Some circuits contain strong current and strong interference (such as high voltage, frequency converter, motor drive, etc.) environment. When it is connected to the computer, it must be isolated to ensure the computer and personal safety.
Noise sensitive areas The computer is a big noise source. In noise-sensitive areas, we can use this device to isolate the USB interface. Such as high-precision USB data acquisition system, HIFI audio system.
USB debugging device For example, JTAG/SWD emulators with various USB interfaces, | SPIASP/AP/ICP downloaders, etc. When you often fail to connect or simulate abnormalities during debugging, you can use the ∪SB isolator to try to improve.
Various industrial USB devices In an industrial environment, USB devices often crash, such as communication devices such as USB mice, keyboards, and USB to serial ports. The USB isolator can effectively reduce the crash and damage probability of these devices in an industrial environment. Sometimes it is necessary to extend the USB cable. The USB isolator can act as an excellent USB repeater, and can also isolate the ground pressure difference between upstream and downstream devices.
Other common USB peripherals Mouse, keyboard, USB sound card, USB printer, digital camera, USB hub (HUB), USB camera.
Medical equipment Some medical equipment is connected to the computer through the USB interface. During the process of collecting data or treating the human body, it needs to have direct electrical contact with the human body. It is necessary to avoid the high voltage that may be conducted from the computer to the human body through the equipment and interface lines to cause electric shock. The electrical isolation of the interface circuit is one of the important protective measures.
Supported devices: Full-speed devices: USB flash drives, digital cameras, card readers, mobile hard drives, ∪Shield, ∪SB hubs, AVR-JTAG, AVR|SP, AVR|sPMK, S-Lab, JET51, J-Link, FET430UF, PCKT2, XDS100 , LPC-Link, CD2, USB to serial port (FT232, CP2102, PL2303, CH341 chips).
Low-speed devices: keyboard, mouse, USBASP, USBHID devices, USBCDO devices.
Unsupported devices: USB wireless network card, some USB30 flash drives.
