Condition:New
Type:Logic ICs
product description
4-way controller 10A relay with normally open and normally closed output. 4-way switch inputs (dry contact input). For intelligent home control, secondary development using a mobile phone or computer remote control lights, motors, and other electrical equipment. Can also be used for room outage detection, infrared sensors can be connected to the body, can be accessed by a key switch, which can be accessed smoke alarm output. It provides C ++ source code. Reliable network connection, disconnection Yeah router restarts, reliable network connectivity is restored, cross-gateway remote control. This product 5V power supply, power supply is not less than 2A.This product can be used to transparently transmit switch function (the one set to TCP server, TCP client to another, you can achieve transparent transmission switch, one switch input relay output control another setting, and vice versa ), if you want to use this feature,To Additional Description (photographed message Remarks or Want contact customer service notes).The default without switching transparent transmission.
feature of product
1, support the work of the TCP server, TCP client, UDP mode.
2, support the work of four customers in the TCP server mode terminal.
3, supports MODBUS TCP protocol, support Kingview.
4, support online update program, very easy to customized programs.
5, can customize the device name, supported by Chinese definition, when equipment when not recording more cumbersome IP number.
6, you can customize the heartbeat packet time off network recovery reliability.
7, can work in transparent mode switch.
Very simple control command
Send on1 opens first relay, send off1 closing the first relay, the same way as the first 2-4 road control. Send read reading relay of state, such as return relay1000, it represents the first road relay, the relay off the road 2-4. You can delay control, such as sending on1: 02, indicates relay two seconds after the release, sent on: 12 indicates relay energized 12 seconds after the release, the longest 99 seconds delay.
YieldProduct Usage
Can be used for access control, control computer is turned on, the remote control of appliances, which can be accessed smoke alarm output, can connect the human body infrared output, can connect the key switch, can be accessed by any passive switch input,You can also take an active digital input (5V active switch connected).Outside the network can control, mobile remote control (mobile APP to their own R & D).
Product Image
Very easy setup interface
Provide a C ++ program, VS2010 project, this software enables remote control, remote control requires binding domain, usually a router peanut shells landing. Here is the application program interface provided. The following interfaces provide source code.
Shipping list: NET4I4D a device
