Condition:New
Type:Logic ICs
1000MHZ-2700MHZ broadband power amplifier, output up to 6 watts power, can be used for 2.4GHz band amplification
4-6Watt output broadband RF microwave power amplifier
Product application:
Present amplifierThe utility model has the advantages of ultra wide frequency range, high gain, large output power, etc.It is widely used in all kinds of drive stage or final stage of radio frequency transmitterScientific research experiment, EMC electromagnetic compatibility test, 2.4GHZ remote control, 2.4GHZ image transmission equipment final stage,In addition, due to the wide bandwidth of the amplifier, it can be used in radio management to test the whole band spectrum monitoring.
The amplifier is made of CNC CNC milling of aviation aluminum alloy, high precision, light weight, appearance after the color of conductive oxidation treatment, conductivity and electromagnetic shielding effect is excellent! The RF power supply port capacitor, the capacitor can effectively filter out the power supply of pulse clutter!
Amplifier parameter index:
Operating frequency: 1000MHz-2700MHz
Output power:
5W1200MHZ
6 W1400MHZ
6 .2W1600MHZ
5.6W1800MHz
Four point fiveW2000MHz
4.67W2400MHz
FiveW2500MHz
3W2700MHz
Gain: greater than 37dB (in band flatness + 1dB)
The baby input and output have excellent ports, stationed in Bobbi, no antenna, standing wave is not good. The baby is a broadband power amplifier in the true sense, Taobao online there is no power amplifier so the bandwidth of the reflected, which shows the treasurer of the technical accumulation and the technical strength of course, ultimately our advanced network analyzer and a spectrum analyzer.
Our stuff is not expensive, experts know. Industrial design standards.performanceNo other bargains compare. For example, the power amplifier, the last stage is the synthesis of broadband double bridge, even if the final master power tube broken a power amplifier, but will be reduced, but did not affect the gain of amplifier, the amplifier can still work normally. Obviously, the price of the two tubes is definitely more expensive than that of a tube, but the benefits of redundant design are stability and reliability. Also, with isolated networks, even if your antenna is not good enough, it will not burn the amplifier.
The output power can be adjusted by 1dB step by step, and the attenuation range is 30dB. The dial switch in the picture is used to adjust attenuation
The output of the amplifier has a 3dB bridge synthesis network, so the output of the amplifier is not exposed to the load or the antenna even if it is not in a short period of time!!! This is not the function of each amplifier!
Power supply: 12V supply current, 2A0dBm input power
Size: 180*60*18mm, with 4 mounting screws
