AD9959 AD9958 signal generator DDS module supports the official software electronic contest

AD9958/AD9959 high frequency DDS module

One package:AD9959 4Channel with controller?(Default delivery)

Module features:

1, AD9958/AD9959:2/4 channel, high frequency output: 1HZ-200Mhz, module after a number of re design and change board can output 200Mhz beautiful signal;

2, 2/4 channel independent of the frequency, amplitude and phase can be adjusted;

3, 32 bit accumulator, the frequency resolution is better than 0.12HZ;

4, 14 phase registers, phase resolution of 0.022 degrees;

5, 10 amplitude registers, amplitude 1024 fine adjustable;

6, 2 order, 4 order, 8 order, 16 order, ASK, PSK, FSK powerful modulation function;

7, linear frequency, amplitude and phase sweep function;

8, independent programmable DAC output current;

9, high speed SPI communication;

10, fully compatible with the ADI original PC software, AD9959 chip can achieve all the powerful functions, the control board using USB2.0 interface, easy to use;

11, the use of modular control, AD9958/59 module and control board is independent, easy to use other controller;

12, AD9958/59 module output part of: three road output directly, a road can be with the signal output transformer (support the PCB, but the default output directly, need to contact output transformer we special treatment, in addition to increases of $50).

TwoModule measured waveform:

50sine wave

1Msine wave

10Msine wave

200Msine wave

Three, module application:

1,Local oscillator;

2,Test equipment;

3, synchronous clock,High frequency signal source;

4, AD9958/AD9959 learning module;

5, repair with a signal source

Four, module performance parameters:

1, controlled by USB (5V power supply)

2, the output frequency channel: 1Hz-200Mhz,0.12HZ resolution;

3, the output range of 0 - 500mVPP1M high resistance;

4, independent phase adjustment, 0.022 degree fine phase resolution, IQ and other signal can be achieved.

Five, suite:

1, AD9958/AD9959 module *?1

2.Controller board?*?1

3, PC control software + schematic (PDF) + other information?