Condition:New
Type:Logic ICs
AD9958/AD9959 high frequency DDS module V3 version
AD9958 2 channel+Control panelOriginal PC control?Software
AD9959 4 channel+Control panelOriginal PC control?Software
original PC software is designed to be based on the use of the application, which is much easier to use than the official, and can now be implemented: multi channel frequency, amplitude, phase control, andASK, PSK, FSK2 order, 4 order, 8 order, 16 order strong modulation function, as well as the realization of multi mode linear sweep frequency (FSK Ramp) function,It's important to keep the function..
Module features:
1, AD9958/AD9959:2/4 channel, 500MSPS, the highest 200M sine wave output;
2, 2/4 channel independent of the frequency, amplitude and phase can be adjusted;
3, 32 bit accumulator, the frequency resolution is better than 0.12HZ, the control panel control accuracy of 1Hz;
4, 14 phase registers, phase resolution 0.022 degrees, control panel control phase accuracy of 1 degrees;
5,10 bit amplitude register, 1024 level fine adjustable;
6,2 order, 4 order, 8 order, 16 order, ASK, PSK, FSK powerful modulation function;
7, linear frequency, amplitude and phase sweep function;
8, independent programmable DAC output current;
9, high speed SPI communication;
10,Original PC control software, the control board uses 32 bit MCU:STM32F103, interface with USB2.0 and serial port;PC software and USB driver support for any version of the Windows operating system;
11, the use of modular design, you can use their own control module control;
12, to provide the bottom of the AD9958/59 driver source code, very easy to use and transplanted to any MCU:
AD9958_CSR void (char data unsigned);
AD9958_FR1 void (long data unsigned);
AD9958_FR2 void (int data unsigned);AD9958_CFR void (long data unsigned);AD9958_CFTW0 void (long data unsigned);AD9958_CPOW0 void (int data unsigned);AD9958_ACR void (long data unsigned);AD9958_LSRR void (int data unsigned);AD9958_RDW void (long data unsigned);AD9958_FDW void (long data unsigned);AD9958_CH_Word void (long data unsigned, char index unsigned);AD9958_Init void (void);
TwoModule measured waveform:
Three, module application:
1,Local oscillator;
2,Test equipment;
3, synchronous clock,High frequency signal source;
4, three phase signal source (AD9959 module);
5, AD9958/AD9959 learning module;
Four, module performance parameters:
1, control board power supply: USB communication: USB to the control board power supply, external 5V power supply to the AD9958/59 power supply; RS232 communication: external5V power supply to the AD9958/59 and control board;
2, using high-speed amplifier output coupling, impedance matching, 200M post filter;
3, the output frequency of 0---200M, 1HZ resolution;
4, the output range of 0 - 2VPP1M high resistance, 0--1VPP50 europe,
Amplitude flat: 0 - 100M 0.4dB
100M---150M1dBFlatness
Amplitude can be achieved through the upper computer software to achieve the 1024 level of fine adjustable;
5, independent phase adjustment, 1 degree fine phase resolution, IQ and other signal can be achieved.
Five, suite:
1, AD9958/AD9959 module 1
2, control module 1
3, USB line a
4, PC control software + schematic (PDF) + other information + technical support;
5, STM32 procedures (Note: is the old version of the program, is not compatible with the latest version of the PC control software, so don't use this program replaced the MCU board procedures, if it is developed in addition to buy a piece of MCU control board).
