Condition:New
Type:Logic ICs
AD9958/AD9959 high frequency DDS module V2
AD9958 2channel+high speedUSB2.0Control panel+ADIOriginal PC software
AD9959 4?channel+high speedUSB2.0Control panel+ADIOriginal PC software
Module features:
1, AD9958/AD9959:2/4 channel, 500MSPS, the highest 200M sine wave output;
2, 2/4 channel independent of the frequency, amplitude and phase can be adjusted;
3, 32 bit accumulator, the frequency resolution is better than 0.12HZ;
4, 14 phase registers, phase resolution of 0.022 degrees;
5,10 bit amplitude register, 1024 level fine adjustable;
6,2 order, 4 order, 8 order, 16 order, ASK, PSK, FSK powerful modulation function;
7, linear frequency, amplitude and phase sweep function;
8, independent programmable DAC output current;
9, high speed SPI communication;
10,compatibleADIThe original PC software can be realizedAD9959All functions of the chip, the control board using USB2.0 interface, easy to use;
11, ultra low power, 4 channel Signal tone 200M output, power consumption is only 580mW;
TwoModule measured waveform:







Three, module application:
1,Local oscillator;
2,Test equipment;
3, synchronous clock,High frequency signal source;
4, AD9958/AD9959 learning module;
Four, module performance parameters:
1, control through the USB (5V power supply), the AD9958/AD9959 module uses +-5V power supply,Note: because of load imbalance with the positive and negative terminals, + - mode power supply can not, this may lead to the negative terminal of the voltage is too high;
2, using high-speed amplifier output coupling, impedance matching, 200M post filter;
3, the output frequency of 0---200M, 0.12HZ resolution;
4, the output range of 0 - 2VPP1M high resistance, 0--1VPP50 europe,
Amplitude flat: 0 - 100M 0.4dB
100M---150M1dBFlatness
Amplitude can be achieved through the upper computer software to achieve the 1024 level of fine adjustable;
5, independent phase adjustment, 0.022 degree fine phase resolution, IQ and other signal can be achieved.
Five, suite:
1, AD9958/AD9959 module 1
2, control module 1
3, USB line a
4, a cable
5, PC control software + schematic (PDF) + other information + technical support;
6,Provide STM32F103 based program;