Brand Name:icchipcn.com
Condition:New
Type:Logic ICs
1. The SL-16 port on the left side of AX-17 is connected to the radio frequency output port, and the SL-16 radio frequency port on the right side is connected to the antenna.
2. The black protrusion in the middle of the left side is the Bluetooth antenna.
3. ACC is an 8-pin data cable interface, the definition is shown in the table on the left side of the controller panel.
4. For the two multi-function buttons with lights on the right side, see the table on the right side of the controller panel for the definition of flickering.
A. After the power is turned on, the DOWN button will flash blue, indicating that the Bluetooth is not successfully connected to the mobile phone. If the connection is successful, the blue light will be always on, and the UP button will be solid red, indicating that the power is turned on;
B. When the AX-17 automatic controller is tuned, the red light will flash, or when fine-tuning in the mobile APP, the red light will flash once every time the fine-tuning button is pressed;
Pressing the UP or DOWN button will turn on the lifter to raise and lower;
C. Pressing the UP and DOWN buttons at the same time will make the antenna drop to the bottom, which is the UV segment status of the ATAS-120A, M-120A, M-130A antennas.
5. The 4-core interface of the data cable is the antenna interface connected to the ICOM radio. If the radio station unexpectedly needs an external power supply of 12V-15V, the matching external power supply line is red for positive and black for negative.
6. The 2-core interface of the data cable is the output interface, which is used to supply power to the antenna downer and control the raising and lowering. Do not connect it to the power supply, it will cause the internal relay of the controller to be short-circuited and the contacts will melt; it is also possible It will burn some power supplies without short-circuit protection devices, and even more seriously, the power cord directly connected to the vehicle battery will burn red and cause a fire! ! !
7. When inserting and unplugging the 4-pin antenna interface, be sure to move the gray sheath back to expose the entire interface, and then plug and unplug, otherwise the interface will be damaged.
8.Provide English APP:
Two standard shipping plugs:
1. The four-core red and black wires are used for powering radios other than ICOM, and
2. The two-core red and black wires are connected to the rejector wire.
AX-17 can directly drive ATAS-120A, M-120A, M-130A short-wave vehicle antenna, realize automatic tuning, and can drive the amplifier up and down at the same time.
AX-17 has a built-in Bluetooth module, which can communicate with mobile APP, wireless control, and APP Chinese interface.
AX-17 can also automatically control the electric screwdriver antenna with 12V DC motor, such as: Diamond SD330, American Tarhell Model, Tarhell Little, etc., with strong compatibility.
FT-857, 897, 450D, 891, 991 and other radios can drive M-120A and M-130A antennas well without AX-17.
Solid materials are the basis for stability, all new original components are used, 
... Large-scale machine installation and welding .
