Marco Rodin Star Coil-Introduction

This coil provides confidence for the pursuers of perpetual motion machines. Of all the options I have seen, this is the most feasible.

There are many experimental devices claiming to be "perpetual motion machines" on the Internet. Regardless of whether the video is fake or not, let’s just talk about a few suspicious points:

1. The contact friction of materials will always cause the loss of parts and materials. This type of machine cannot be regarded as a perpetual motion machine.

2. The magnetic force of the magnet will always slowly weaken with the passage of time...

Therefore, what small devices can do at present can only be "long-term motives", which may continue to be used for several months or years... but it cannot be said to be permanent.

Maybe the perpetual motion machine really has to be like what they said, something anti-matter, this kind of thing. This is beyond 99.9% of people’s understanding

There is no doubt that the Marco Rodin coil is the most feasible in the "perpetual motion machine" experiment videos or materials I have seen.

1. If the output of the suspended roller is much larger than the input, it can be replaced with an electromagnetic suspension.

2. Super high speed.

Marco Rodin star coil-production method

Divide a circle into 12 equal parts, one point for every 30 degrees, and 12 points in one circle. When routing the line, follow a straight line at an angle of 30 degrees. After walking through a layer, 13 straight lines are formed, and finally a star-shaped coil is formed, as shown in the figure. order

After rectification and stabilization, the output voltage of the pickup coil increases with the increase in speed, and continues to increase until the last 90V. In order to protect the device, the limit output has not been tested, but I believe that the output is up to 100V. No problem. Input power is 12V2A