Condition:New
Type:Logic ICs
Brand New For Engraving Mechine CNCUSB MK1 USBCNC 2.1 Substitute MACH3 4 Axis USB CNC Controller Interface Board
It uses 40-pin plug-in single-chip microcomputer, which is convenient for maintenance and replacement.
All HT3.96 sockets are used for easy wiring.
3 outputs have instructions, and a relay directly controls external equipment.
Complete isolation can control the frequency converter.
An external manual interface is convenient to connect to an external manual control box.
Increase the power supply self-recovery insurance to protect the computer.
The latest version of the software can:
Can use plasma
Can use 3D printer
You can use the man to export the G code
Complete functions (integrated regulated power supply, inverter spindle speed control, convenient terminal block, external limit, external tool setting, external origin. External I2C. External manual, external emergency stop, external reset, external relay, output instructions, work Instructions, reset button, upgrade button are all, convenient stepper motor driver wiring), easy to use, simple to upgrade, unlimited use. The price is low, there are detailed information in the CD, and there is a forum column for technical guidance and exchange.
Features and specifications:
Can run on Windows XP, Vista or Windows 7 Windows 8 (32-bit or 64-bit PC/laptop USB interface (version 2.x))
Can be used in pulse/direction stepper motors and servo motor drivers on the market
Output and input are the highest performance buffer
Has advanced interpolation algorithm
You can start, stop, pause and resume the execution of programs on your computer
RS274/NGC G code (EMC2 compatible standard)
Support advanced G-code-G40, G41, G42 (tool radius compensation)
Advanced G-code-G43, G49 (tool length compensation)
Support advanced G codes-G54, G59.3 (origin of coordinate system)
Support 4-axis and 3-axis G codes
Tool path can be imported from DXF file
Toolpaths can be imported from PLT/HPGL files
Toolpaths can be imported from image files
Can use CNC drilling tool path file
Tool path simulation possible
Advanced tool change program
Automatic tool length measurement possible
Provide SDK (software development kit)
The key function can be defined externally
Can cut foam
Maximum step frequency 25 kHz
3 digital outputs (flood, fog, spindle)
Minimum pulse width 12
All axes can be manually
All axes can be connected to the limit
I2C protocol that can control external devices
