CAN fiber bus converter CAN to fiber CAN optical cat CAN optical transceiver CAN bus CANbus

Condition:New
Type:Logic ICs
Supply Voltage:DC5-30V
Product descriptionNLK-1503 optical fiber converter realizes the conversion of CAN-BUS bus signals into optical signals for transmission on optical fiber. This product has the function of extending the communication distance of CAN-BUS bus. At the same time, the use of optical fiber communication solves electromagnetic interference and ground loop interference The problem of lightning and lightning destruction has greatly improved the reliability, security and confidentiality of data communication, transparent communication without any settings, suppression of transient interference on CAN-BUS data lines, communication rate of 200KBPS, power and data flow indicators Instructions for troubleshooting, can be widely used in various industrial control, process control and traffic control, electricity and departments and systems with special requirements for electromagnetic interference environment.??Features■ Automatically identify the signal flow direction, and automatically forward with zero delay;■ Relay distance 0-10KM, communication baud rate adaptive from 0-200KBPS;■ Built-in 600W / MS anti-lightning protection and 15KV anti-static protection;■ Industrial design, optimized imported components, all surface mount technology■ Rail-mounted, wall-mounted installation■ D single-mode / multi-mode optional■ Single core / double core optional■ SC / ST / FC interface optional?Product informationTransmission distance: single-mode: 10KM, multi-mode: 2KMCAN interface: industrial ten PIN terminal blocksOptical fiber interface: SC / ST / FC optional single fiber / double fiber optionalStatic protection: ESD 15KV electrostatic protectionLightning protection: 600W / MSInput voltage: DC5 ~ 30V / 350maCommunication speed: 0-200KbpsWorking temperature: -40 ℃ ~ 85 ℃Appearance size: 120 * 70 * 26MMInstallation: DIN card rail type, wall mount optional?Communication distance table:CANbus distance comparison tableCANbus baud rate | communication distance5K | 10KM10K | 6.7KM20K | 3.3KM50K1.3KM100K | 620M125K | 530M250K | 270M500K | 130M1M | 40MThe communication distance of CANBUS to fiber converter is determined according to the baud rate. The higher the baud rate, the closer the distance. For specific distances, please refer to the table above.