CEMS Dual-path Flue Gas Detection Gas Analyzer Electronic Dehumidifier Condenser Experimental Low Power Dryer

Brand Name:icchipcn.com
Condition:New
Type:Logic ICs
First, the composition of the instrumentThe instrument is composed of core components such as a cooling system, a strong exhaust group, a power supply and a temperature controller.?Second, the functional characteristics of the instrument1. Accurate measurement of gas composition requires sample gas, which can maintain a constant dew point even in harsh environments. The semiconductor electronic condenser provides a Peltier effect cooling system, which is mainly used in the pretreatment process before various gas analysis. , Remove the condensate in the sample gas, make the sample gas ultra clean, constant temperature, stable flow, and play a role in improving the accuracy of analysis and measurement.2. The cooling system is a combination of semiconductor refrigerators imported from Japan, Japanese temperature-sensitive temperature probes, corrosion-resistant heat exchangers, and ducts. The system is designed as interchangeable components for easy repair and maintenance.3. Under normal conditions, the ambient temperature is 5 ° C ~ 50 ° C, and the gas flow rate is 1L / min ~ 3L / min. The electronic controller will maintain the outlet gas dew point temperature within 1 ° C ~ 5C, and the temperature value will be in the C way in the case Visual display on LED screen.4. According to the basic principle of the system, the condensate can be discharged through the peristaltic pump, or it can be discharged through the automatic water flow device.?Third.Performance parameters of the instrument1.Performance(1) Instrument pre-cooling time: After the instrument is powered on, the pre-cooling time is about 10 minutes:(2) Cooling capacity: 280K1 / H at 50 ℃:(3) Ambient temperature: The temperature of the outlet gas at 2C ~ 40 ℃ is 1 ℃ ~ 5 ℃. When the ambient temperature is set above 50 ℃, the dew point temperature of the outlet gas will rise proportionally. When the ambient temperature rises to 60C, it will not be used continuously Will be damaged, when the ambient temperature returns to below 50 ℃, gas performance can be restored.2. Cooling method(1) Peltier effect cooling: (2) Forced wind cooling3.Gas(1) Gas flow: 1 ~ 3L / min(2) Airtightness: the drop value of 0.1Mpa gas pressure after 15 minutes does not exceed 2%?Fourth, temperature adjustmentIn the normal state, press the SET key 3 times to display the flashing setting value, and then press the A and V keys to adjust to the desired setting value. Press the SET key and the screen flashes once, indicating that the modification is successful. This value is the lower limit stop point. The factory setting is 4 ℃, and the adjustment range is 1 ℃ ~ 99 ℃. (Note: the parameters have been set)?Fifth. Appearance and Installation1. Dimensions: 255 * 205 * 155mm2. Installation size: 22.5 * 22.5mm3. Weight: about 8.5KG?