Model Number:38189292947
Operating Temperature:-40 to 85
Type:Logic ICs
Condition:New
Relay Type:Electromagnetic relays
Applicable:Machine relay
EAZY-VLCThe controller , which can control by detecting two DC voltage two-way relay or release , or to control two -way relay timing delay action .
Use of this product may be used to control the battery charging and discharging , the voltage controlled delay is turned on, two -way simultaneous or alternating load off and so on.
Version update:The baby 7.16 updated VLC-U5 future versions of the control function is mainly used for detecting the voltage , remove VLC_2.0 mode version of P-3 :A BDual Joint relay ( rotation cycle ) mode ,VLC-U5 versionThe P-4 voltage relay mode increases the voltage detection control timing can be set to a variety of state , such as the state of the page below the schematic .
Manual is the electronic version of the download address:pan.baidu.com/s/1hq5Rb28( Copied to the browser to open )
Buy Note:
Default shipping is 12V working power version , please read the introduction and use of product features manual before buying , use the relay board control functions and wiring more complex operations , the need to have some basic and practical ability electrician who .
Each relay has a contact switch , when released, normally closed and common point turn , normally open and common point off ; pulls in, the normally open and common point connected to the normally closed -off point and the common point open .
Electrical box / case , please shoot :item.taobao.com/item.htm?spm=0.0.0.0.SZF6mV&id=37154337668
Controller structure diagram :
1.Mode selection menu :
P-1:ARoad time ( timing ) relay
P-2:BRoad time ( timing ) relay
P-3:A BDual independent relay (A, B simultaneous independent cycle timing )
P-4:A BDual voltage control relay
P-5: Digital auto-off time and reset
2 Features:
- Four digital display , setting all functions via three buttons , easy to operate , powerful, has a factory reset function.
- High-performance control chip, industrial-grade performance, high process stability, low power design , digital display can be automatically shut down , the minimum operating current7mA / 12V. With a reverse power protection , surge current shock .
- Dual time relay , timing range: 0.1 seconds ~ 9999 minutes adjustable, single pull release timing or cycling , cycle times adjustable from 0 to 999 ( 0 for infinite loop ) ;
- Each relay contact point for the public and normally open , normally closed , a total of two sets of conversion ;
- Dual time relay can run simultaneously and independently , can be high or switch to trigger the start (P-3 mode ) ;
- Dual Dual voltage detection control relay , the detection voltage range : DC 0 ~ 99.9V, overrun relay or start timer delay can also be switched off delay (P-4 mode ) ;
- All parameter settings can be powered down to save , the next time the power modes and parameters continue to the last run.
3.Performance parameters:
- Timing range: 0.1 seconds ~ 9999 minutes adjustable from 0 to 999 times the number of cycles is adjustable ;
- Voltage detection display range : 0 ~ 99.9V error : 0.1V
- Power supply : DC 10 ~ 15V (24V version of the operating power for DC18~28V)
Relay parameters:
- Two -way , each a set of conversion ( normally open normally closed )
- Contact load :10A/ 277VAC 10A / 30VDC
- Contact resistance : 100m (1A-6VDC)
- Mechanical Durability: > 10 million times
- Electrical Durability: > 100,000 times (10A-250VAC)
- Normal working current : 18mA / 12V ( when the relay is released ) , the minimum standby current 7mA / 12V
- Working temperature : -40℃ ~ + 85℃
- Setting parameters can be powered down to save for 30 years
4 mode introduced:
User through the key settings can be realized as the following functions:<
