electrolysis of water generator Electrolyzer 200-300W 220V-12V
electrolysis of water generator Electrolyzer 200-300W 220V-12V
electrolysis of water generator Electrolyzer 200-300W 220V-12V
electrolysis of water generator Electrolyzer 200-300W 220V-12V
electrolysis of water generator Electrolyzer 200-300W 220V-12V

electrolysis of water generator Electrolyzer 200-300W 220V-12V

Price:   $84.65

  • Model: ic0A1375
  • Shipping Weight: 0.2kg
  • 9999 Units in Stock

(0 reviews)
(complete orders today,deliverd around 18/04/2025)
  • Shipping time
    Shipping Worldwide.About 5-15 days.
  • means of transportation
    EMS,DHL,FEDEX,HK Post
  • Payment
    Paypal,T T,
  • Email us
    [email protected]
  • New Products
    New original F65545 B2 W65545AE3 controller chip
    $11.00
    5PCSLOT TPV101D = TPV101AD DIP-8 LCD power management chip In Stock NEW original IC
    $2.35
    32PIN CHIP DC 12V-24V TPA3118 60W Mono Digital Audio Power Amplifier Board Amp Module 32P chip original chip
    $2.20
    10PCSLOT NEW SN74LS259N 74LS259 DIP-16 Logic chip integrated block IC In Stock
    $2.20
    • Details
    • Reviews
    • Tags
    • FAQ
    Condition:New
    Type:Logic ICs
    Supply Voltage:220V
    Color classification:Trumpet size

    After receiving the goods, you must contact the customer to make sure that the instructions are electronic and that you are responsible for all the consequences of not operating according to the instructions, and that they are not guaranteed.

    Production of hydrogen and oxygen 100-110L per hour













    Matters needing attention:

    ?Read the following carefully before buying?1. It is normal to receive water inside the product. We will conduct sealing test before delivery.?2. In addition, it must wait for more than half a minute to ignite again to prevent tempering from causing explosion.?3. The spray gun valve should not be closed after power-on. If it needs to be closed, the spray gun valve must be closed first and the power supply should be disconnected immediately.?4. The temperature of burning gas is too high to touch by hand.?

    Method of use:

    ?1. First, dissolve sodium hydroxide in water to form a saturated solution.?2. Pour the liquid along the copper tube into the reactor. The liquid height is about 3/5.?3. Wrap the copper pipe and add more than 2/3 of the water into the adjacent acrylic pipe.?4. open the valve.?5. Wait half a minute for electricity to empty the air.?6. ignition.?7. If you need to shut down, you must first turn off the spray climber and then turn off the power supply.


    User manual:

    http://www.mediafire.com/file/cv83mutb44kbr55/Electrolysis__water_generator%25282%2529.docx/file