Condition:New
Type:Logic ICs
Model Number:2 remote controller
Operating Temperature:+80 to -40
1: Product Introduction
2 Road 10A relay controller, with two normally open relay output, not with a normally closed output, for smart home control, secondary development using a mobile phone or a computer remote control lights, motors and other electrical equipment to provide C + + source code. Reliable network connection, broken network ah router restart, reliable recovery network connection, remote control gateway. 5V power supply of this product.In the TCP server mode to support 4 network connections (spike on the market only to support a connected product).
2: product parameters
1 supply voltage, 5V, no less than 1A current.
2 two-way relay single channel function rate of the largest 2KW, the maximum current of single channel 10A, single channel maximum voltage 250V, can be connected to AC or direct current.
3 appearance size MM 81*50*31.
4 operating temperature +80℃ - -40℃.
3: product features
1, support work in the TCP server, TCP client, UDP mode.
2, work in the TCP server mode to support 4 client connections.
3, support the TCP MODBUS protocol, support kingview.
4, support online update program, very convenient customer order process.
5, can customize the name of the device, support the definition of Chinese, when the device is more than the time to record the cumbersome IP.
6, you can customize the heartbeat packet time, reliability, broken network recovery.
7, using the high performance of Cortex-M3 32-bit microcontroller stm32f103c8, and is not available in the market, the 8 bit microcomputer and network chip used is w5500 hardware protocol, and ENC28J60 is not the low cost.
4: very simple control instructions
Send on1 that is to open the first relay, send off1 to close the first relay, the second way control method. Send read1 read first road relay state, such as the return of the continuous on1 said first road relay, return to this first road relay release. Delay control, for example, to send on1:02 and said relay 2 seconds after release, send on:12 said relay 12 seconds after loosen, delay the longest 99 seconds.
MODBUS TCP
01, 1 operation code
This operation code is to read the status of the relay, the relay address: the first 0010, second, 0011.
05, 2 operation code
The operation code is to control a single relay,Relay address: No. 0010, second, 0011.
3, 0F operation code
This operator is to control the two relays,Relay address: No. 0010, second, 0011.
5: ProductionProduct use
Can be used for access control, control computer to open, remote control of electrical appliances. Can control the network, mobile phone remote control.
6: wiring diagram
7:Very convenient settings interface
Provide C++ program, VS2010 project, this software can be used directly.
Android mobile APP control (apple did not)
8:Size chart
9: shipping list:With shell2 way relay control panel (not included in the power supply). Weight 79 g / A.
