Type:Logic ICs
Condition:New
Decoration and construction contents:Installation engineering
Freight number:FY-1000S
Color classification:FY1008S FY1005S FY1002S FY1010S
FY1000S seriesfunctionSignal generator
FY1000S series DDS function signal generator (signal source) is a portable, high performance, high cost performance, multi-function signal generator which integrates functions of function signal generator, pulse signal generator, frequency sweeper, counter and frequency meter. The instrument uses large-scale FPGA integrated circuit and high-speed MCU microprocessor. The internal circuit uses high-precision active crystal oscillator as the reference, and the signal stability is high. The surface mount technology greatly improves the anti-interference and service life of the instrument. This instrument achieves the perfect combination of easy-to-use, excellent technical indicators and many functional characteristics in signal generation, frequency scanning, parameter measurement and use. It can help users accomplish their tasks faster. It is an ideal test and measurement equipment for electronic engineers, electronic laboratories, production lines, teaching and scientific research. At the same time, it can also be used as an industrial control module.
The last two digits 00 of FY1000S series instrument model indicate the upper limit of sine wave frequency (MHz) of this type instrument. Example: FY1002S, 02 indicates that the sine wave output frequency of the model can reach up to 2MHz.
A new 12 PIN-2.54mm single-row interface is added, through which all operation keys and knobs on the module can be easily drawn out through the arrangement of wires. If we use our product as a module of your product, assembly will be more convenient and fast.
Small size, many functions, easy to carry.
Frequency accuracy is high: frequency accuracy can reach 10-6 orders of magnitude.
High frequency resolution: full range frequency resolution 10mHz
Limit without range: full range frequency is not divided, direct digital setting.
The waveform accuracy is high: the output waveform is synthesized by the function calculation value, the waveform accuracy is high, and the distortion is small.
A variety of waveforms: sine wave, square wave (duty ratio adjustable), triangular wave, sawtooth wave, dual TTL level.
Scan characteristics: linear scanning and logarithmic scanning two scanning modes, scanning parameters can be set by users.
Storage characteristics: can store 10 sets of user set of instrument state parameters, can be reproduced at any time.
Operation mode: All key operation, LCD1602 LCD English display, direct digital setting or knob continuous adjustment
High reliability: large scale integrated circuit, surface mount technology, high reliability and long service life.
Frequency measurement: with 60MHz frequency meter and counter function, the internal and external signals are measured.
| Product specification | FY1002S | FY1003 | FY1005S | FY1008S | FY1010S |
| Sinusoidal frequency range | 0Hz - 2MHz
| 0Hz - 3MHz
| 0Hz - 5MHz
| 0Hz - 8MHz
| 0Hz - 10MHz
|
| Square wave frequency range | 0Hz - 2MHz
| 0Hz - 2MHz
| 0Hz - 2MHz
| 0Hz - 2MHz
| 0Hz - 2MHz
|
| Triangular wave frequency range | 0Hz - 2MHz
| 0Hz - 2MHz
| 0Hz - 2MHz
| 0Hz - 2MHz
| 0Hz - 2MHz
|
| Other waveform frequency range | 0Hz - 2MHz
| 0Hz - 2MHz
| 0Hz - 2MHz
| 0Hz - 2MHz
| 0Hz - 2MHz
|
| Signal output parameter |
|
Output waveform
| Sine wave, Fang Bo (duty cycle adjustable), triangle wave, Ju Chibo
|
Output amplitude
| More than 10Vp-p (no load)
|
Output impedance
| 50 Omega 10%
|
DC offset
| -100%~+100%
|
frequency resolution
| 0.01Hz (10mHz)
|
Frequency accuracy
| + 5 * 10-6
|
Frequency stability
| + 2 * 10-6/3 hours
|
Sinusoidal distortion
| Less than 0.8%(reference frequency)1KHz)
|
| Triangle wave linearity | More than 98%(0.01Hz~10kHz)
|
Square wave rise and fall time
| Less than 100ns
|
Square wave duty cycle range
| 1%~99%
|
TTL output
| Dual TTL level output |
Range
| >3Vp-p
|
Fan-out
| >20 TTL load
|
| TTL levelRise and fall time | Less than 20ns
|
Function of frequency counter
|
|
Counting range
| 0-4294967295
|
Frequency range
| 1Hz~60MHz
|
Input amplitude
| 2Vp-p~20Vp-p |
Scanning function
|
|
Scanning mode
| Linear scanning and logarithmic scanning
|
Frequency setting range
| The starting point and ending point are set arbitrarily (the frequency of termination is greater than the initial frequency).
|
Frequency sweep range
| M1 preset frequency ~M2 preset frequency
|
Scanning rate
| 1s~99s/ stepping
|
| Other characteristics |
|
Display mode
| LCD1602 LCD display in English
|
Storage and transfer functions
| M00-M19(M00:Default transfer)
|
size
| 95mm (long) x 65mm (wide) x 28mm (high)
|
weight
| 230g
|
Buzzer prompting function
| It can be turned on or off by program settings.
|
manufacturing process
| surfaceSurface mount technology, large scale integrated circuit,High reliability and long service life.
|
Operating characteristics
| All keystrokes
|
| environment condition | Temperature:0~40 CHumidity:< 80%
|
Power supply voltage
| DC5V 1A
|
1. standard sine wave
2. standard triangle wave
3. standard Fang Bo
4.DUTY=20% square wave
5.DUTY=80% square wave
6.DUTY>50%Triangular wave - > ascending sawtooth wave
7.DUTY<50%--->Sawtooth wave
8. external frequency measurement function
9. counter function
