Type:Logic ICs
Condition:New
Decoration and construction contents:Installation engineering
Freight number:FY3200S
FY3200S seriesWhole process control
Double channel function /Arbitrary waveformSignal generator
FY3200SSeries of dual-channel function/arbitrary waveform generator is a set function signal generator, arbitrary waveform generator, pulse signal generator, sweeper, counter and100MHzFrequency meter and other functions in one portable, high-performance, cost-effective, multi-function signal generator.The instrument uses large-scale FPGA integrated circuit and high-speed MCU microprocessor. The internal circuit uses high-precision active crystal oscillator as the reference, and the signal stability is high. The surface mount technology greatly improves the anti-interference and service life of the instrument.The coMmon function of one key operation greatly improves the operability and practicability of the instrument.
The instrument has two-way function/arbitrary waveform signal output, which can produce sine wave, square wave, triangle wave, sawtooth wave.Pulse width(pulse width can be set accurately, maintaining the same pulse width at different frequencies).Lorentz pulse, multitone, irregular noise, electrocardiogram, trapezoidal pulse, sink pulse, narrow pulse, Gauss white noise, amplitude modulation waveform, frequency modulation waveform,Dual TTL output,FSK frequency shift keying and ASK amplitude shift keyingsignal outputAnd user defined waveforms.The product also has linear sweep and logarithmic sweep functions, and can set the scanning frequency range and scanning time arbitrarily.
The two channels of CH1 and CH2 are completely syMmetrical.The phase difference is adjustable.The parameters of each channel can be set independently. The maximum amplitude of the output signal can reach 20Vpp, and the maximum output amplitude of the dual channel power amplifier can reach 80VPP. FY3225S two output signals can reach up to 25MHz. The frequency, amplitude, offset and phase of the output signal can be prograMmed (the instrument can display the amplitude, phase, waveform and other parameters of the output signal, making your operation more intuitive and convenient). It is an ideal device for electronic engineers, laboratories, production lines, teaching and research.
With our FYV2000 series or FPA1000 series power amplifiers, the signal can output more than 20W undistorted power signal stably in the DC-10MHz bandwidth, and the maximum output power of FPA101A can reach 100W.
Match our company's dual channel power amplifier.Maximum bandwidth 100KHzThe maximum output can reach 80VPP, and the maximum output power can reach 40W.
Unique and practical pulse wave function:Function display: instrument output1US pulse width pulse signal (arbitrary frequency adjustment, pulse width remains the same).
DC DC level output(Note: AMPL parameter is invalid in DC output state, DC level is changed by adjusting Offs parameter)
Multi function PC software:With arbitrary waveform editing function, it can edit arbitrary waveform on PC and download it to the instrument and output waveform. All functional parameters of the instrument support upper computer software control, and communication protocol is open, which makes your secondary development very simple. The upper computer software interface is as follows:
Adopt DDS direct digital synthesis technology to produce accurate, stable and low distortion output signals.
The two channels of CH1 and CH2 are completely symmetrical, and each parameter of each channel can be set independently.
Support user defined waveform.Each groupArbitrary waveThe storage depth is 2048*12bits250MSa/s sampling rate;
Burst burst output function, optional manual trigger, internalCH2Trigger and external trigger three trigger modesIt can make the machine output 1~1048575 arbitrary pulse string.
Measuring function: the instrument comes with itself.100MHzFunction of frequency meter and function of pulse counter
The minimum output amplitude can be reached.10mVppMaximum achievable20VppOutput signal offset level-10V~10VArbitrary adjustment
The width of the waveform generator is as high as12 bitsThe output waveform is more delicate, and the waveform distortion is reduced in magnitude.
It has full CNC function. It can display and digitally adjust the current output signal's amplitude, bias, frequency, duty cycle and phase difference of two signals.
It has FSK frequency shift keying and ASK amplitude shift keying signal output function.
After the instrument is connected with the computer, the functions and parameters of the control signal generator can be controlled by the computer, and any waveform can be edited on the computer and downloaded to the output waveform of the instrument.
Communication function: serial communication, protocol completely open, convenient for users to develop two times.
Frequency accuracy is high: frequency accuracy can reach 10.-6Order of magnitude
High frequency resolution: full range frequency resolution 10mHz
_Tracking function: built-in frequency, amplitude, bias, duty cycle, waveform and other parameters follow function, easy to use
Scan characteristic: it has the function of frequency linear scanning and logarithmic scanning, and the scanning start and stop points can be set arbitrarily.
Storage characteristics: can store 20 sets of user set of instrument state parameters, can be reproduced at any time.
Operation mode:Key operation, LCD1602 LCD display in English, parameters directly digital settings or knob continuous adjustment.
Input overvoltage protection: power input range extends from AC85V to AC240V wide voltage.
Output short circuit protection: all signal output terminals can operate above 60S for short circuit load.
1. 10KHz sine wave (two way stable output, fixed frequency). 
Two, 10KHz square wave (stable output is not distorted). 
Three, 10KHz triangle wave
Four, liter sawtooth wave
Five. Reduced sawtooth wave
Seven, DC DC 5V output.(Note: in the DC output state, the AMPL parameter is invalid, and the DC level is changed by adjusting the Offs parameter).
Eight, DC DC -5V output.
Nine. Lorenz pulse
Ten, multi tone
Eleven. Random noise
Twelve. ECG.
Thirteen. Trapezoidal pulse
Fourteen. Sinker pulse
Fifteen, narrow pulse
Sixteen. Gauss white noise.
Seventeen, amplitude modulation waveform
Eighteen, FM waveform
Nineteen, 100KHz sine wave
Twenty, 1MHz sine wave
Twenty-one, 6MHz sine wave
Twenty-two, 12MHz sine wave
Twenty-three, 20MHz sine wave
Twenty-four, sine wave with a phase difference of 180 degrees.
Twenty-five, sine wave with phase difference of 270 degrees.
Twenty-six. Duty cycle25%square wave
Twenty-seven. Duty cycle75%square wave
Twenty-eight. Fang Bo with a phase difference of 180 degrees
Twenty-nine, 3.3V square wave (3.3V TTL level)
Thirty.5V Fang Bo (5V TTL level)
Thirty-one, sine wave of bias level at 5V.
Thirty-two, double channel bias +5V, -5V sine wave (bias can be adjusted)
Thirty-three, dual DC bias output
Thirty-four, dual TTL level output (phase difference adjustable), driving IGBT
| Product specification | FY3206S | FY3212S | FY3220S | FY3224S | FY3225S |
| Sinusoidal frequency range | 0Hz - 6MHz | 0Hz - 12MHz | 0Hz - 20MHz | 0Hz - 24MHz | 0Hz - 25MHz |
| Square wave frequency range | 0Hz - 6MHz | 0Hz - 6MHz | 0Hz - 6MHz | 0Hz - 6MHz | 0Hz - 6MHz |
| Triangular wave frequency range | 0Hz - 6MHz | 0Hz - 6MHz | 0Hz - 6MHz | 0Hz - 6MHz | 0Hz - 6MHz |
| Other waveform frequency range | 0Hz - 6MHz | 0Hz - 6MHz | 0Hz - 6MHz | 0Hz - 6MHz | 0Hz - 6MHz |
| Signal output parameter | |
| Output channel | The CH1 channel and the CH2 channel are high-speed independent outputs. |
| Output waveform | Sine wave, Fang Bo, triangle wave, sawtooth wave, pulse wave,DC,Lorentz pulse, multi tone, random noise, ECG, trapezoidal pulse, symplectic pulse, narrow pulse, Gauss white noise, amplitude modulation waveform and FM waveform. And user defined waveforms. |
| Output amplitude | 0~20Vp-p(unloaded) |
| Output impedance | 50 Omega 10% |
| DC offset | + 10V |
| frequency resolution | 0.01Hz (10mHz) |
| Frequency accuracy | + 5 * 10-6 |
| Frequency stability | + 2 * 10-6/3 hours |
| Sinusoidal distortion | Less than 0.8%(reference frequency)1KHz) |
| Triangle wave linearity | More than 98%(0.01Hz~10kHz) |
| Square wave rise and fall time | Less than 20ns(reference frequency)100kHz, 10Vpp) |
| Square wave duty cycle range | 0.1%~99.9% |
| TTLoutput | Two way synchronization with CH1 channel and CH2 channelTTLlevelOutput and phase difference adjustable |
| Range | >3Vp-p |
| Fan-out | >20 TTLload |
| TTL levelRise and fall time | Less than 20ns |
| Function of frequency counter | |
| Counting range | 0-4294967295 |
| Frequency range | 1Hz~100MHz |
| Input amplitude | 2Vp-p~20Vp-p |
| Scanning function | This function has only the main wave function. |
| Scanning mode | Linear scanning and logarithmic scanning |
| Frequency setting range | Start and end points are set arbitrarily. |
| Frequency sweep range | M1Preset frequency~M2Preset frequency |
| Scanning rate | 1s~999s/Stepping |
| Other characteristics | |
| Display mode | LCD1602LCD display in English |
| Storage and transfer functions | M0-M19(M0:Default entry) |
| size | 200mm (long)190mm(wide)90mm(high) |
| weight | 550Grams (bare metal), accessories (150G) |
| Buzzer prompting function | It can be turned on or off by program settings. |
| manufacturing process | surfaceSurface mount technology, large scale integrated circuit,High reliability and long service life. |
| Operating characteristics | All key operation, knob continuous adjustment. |
| environment condition | Temperature:0~40 C Humidity:80% |
| Wide voltage supply range | AC85~AC260V |
