Condition:New
Type:Logic ICs
Model Number:IN-12
In-12 tube has mercury vapor inside, the font is clear and without defect.
The service life is much longer than that of domestic products.
Note: Glow tube drive needs 170VDC high voltage, when using, we should pay more attention, try not to remove the shell, prevent touch high pressure, some body paralysis, but good power is very small, just numb, do not touch children casually, children's endurance is weak.
Favorite glow tube features:
1. Numbers have a sense of hierarchy, and they are scattered in different directions. Looking from the side, they have a strong sense of hierarchy.
2. The warm orange glow of the glow;
3. The shape of font, LED and dot matrix are not comparable to them.
Product parameters
1. Power: 5VDC (Android Data Line)
Dimensions: 135 mm * 60 mm * 42 mm (including tube height)
3. High Precision Clock Chip
4. GPS timing (support manual setting of daylight saving time)
5. STM32 Master Control IC
6.4 IN-12 glow tubes and 2 INS1 electron tubes
Product function
1. Time display (12H/24H, two display modes, automatic save)
2. Date Display (MM-DD Monthly Day)
3. Temperature display (Celsius/Fahrenheit, automatic preservation)
4. Setting of Photosensitive Parameters
5. Alarm clock function (1 alarm clock function, automatic saving)
6. Timing switch
7. Glow tube test (adjustable display 0-9 is convenient to test whether the glow tube is in good condition, or whether the welding is in good condition, the default boot is 0)
8. Anti-poisoning time (scan interval time, seconds are not adjustable, the program is set to scan at 30 and 31 seconds, a total of 2 seconds, scan interval time according to actual operation can be automatically saved)
9. GPS time calibration (real-time monitoring of the current time and UTC time difference of more than a second to update, do not need to set a time zone, GPS automatically acquires data to confirm the time zone updates directly (configuring daylight saving time)
10. Buzzer mode (turn off/start buzzer, turn on by default)
11. Intermediate INS1 bulb mode (breathing/flickering/constant light/shutdown effect)
12.4 Digital Switching Effects (Automatic Save)
(1) Gradient effect,
(2) Alternate transformation,
(3) Scan to the currently displayed number.
(4) Normal switching
13.4 mobile effects (turn on/off mobile effects, save automatically)
After opening, mobile effects will be displayed at 00 seconds of time.
Otherwise, this special effect will not be displayed (automatic switching back and forth display can also be turned on)
(1) The position from right to left is extinguished, and after extinguishing, the position from left to right is illuminated.
(2) Leave one position on the left as a whole, then slowly appear one position on the left.
(3) One left and then two, and then the first one brightened to the left and then two.
(4) The left scanner leaves, the right scanner leaves, the left scanner lights up after extinguishing, and the right scanner lights up.
14. RGB mode under the pipe (open/close display, auto-save data)
(1)One color (7 colors can be switched, brightness can be adjusted)
(2) Respiratory effect (breathing brightness can be adjusted, whether automatic switch, default automatic switch)
(3) Random color (the number of tube display changes once to change one color)
(4) Drag Gradient Colors
(5)Close display
Functional characteristics:
1. Time display (12H/24H, two display modes, automatically saved after adjustment)
2. Date Display (MM-DD Monthly Day)
3. Temperature display (Celsius/Fahrenheit, two display modes, automatically saved after adjustment)
4. Photosensitive settings (manual brightness, automatic brightness adjustment)
5. Alarm clock function (1 alarm clock function, automatically saved after adjustment)
6. Timing switch
7. Glow tube test (adjustable display 0-9 is convenient to test whether the glow tube is in good condition, or whether the welding is in good condition, the default boot is 0)
8. GPS Time Calibration (with a difference of more than 1 second, no time zone is required, GPS automatically confirms the time zone to update directly, and manual setting of daylight saving time)
9. Buzzer mode (turn off/start buzzer)
10.4 digital switching effects (automatic save after adjustment)
Gradient effect, alternating display, scanning to the current display number, and normal switching
11. Equipped with infrared remote control, wireless operation is convenient and fast.
12. Using high-precision clock module, timing is accurate, annual error is less than 2 minutes.
13. Time, date and temperature can be set up to switch back and forth automatically.
technical specifications
Input Voltage 5V (Android Data Line)
Glow tube model IN12 glow tube
Acrylic dimension 135 mm * 60 mm * 42 mm
Shell Material 3mm Rubber Composite Board
Introduction of Infrared Remote Controller
Display mode switching
1. "Digital 1 key", the clock enters the display time.
2. "Number 2 key", the clock enters the display calendar (solar calendar) date.
3. "Digital 3-key", the clock enters the display temperature.
4. "Digital 4-key", the clock enters the display photosensitive setting parameters.
5. "Digital 5 key", the clock enters the display alarm clock time.
6. "Digital 6-key", the clock enters the display timing switch time.
7. "Digital 7-key", the clock enters the display glow tube test.
8. "Number 9 key", the clock enters setting time, date, temperature to switch parameters back and forth.
(Note: The remote controller automatically switches back to display time mode after 10 seconds of no operation)
Setting Daylight Saving Time
In display time mode, press the return key for a long time. The first tube shows 1 minus 1 hour, the second tube shows 0 minus 1 hour, and the third tube shows 1 minus 1 hour (relative to GPS calibration time).
Digital switching effect
1. Gradient effect: After the glow tube number changes, the old number will gradually fade away, and the number to be displayed will gradually show up at the same time.
2. Alternate transformation: After the number of glow tube changes, the old number and the number to be displayed are displayed alternately.
3. Rolling flop: When the glow tube number changes, the numbers will be displayed one by one, until the number to be displayed stops.
4. Standard effect: When the glow tube number changes, the new number will be displayed immediately.
The digital switching effect mode will be automatically remembered, and the clock will still be digital switched according to the effect set last time after shutdown.
Switching time format 12H/24H
In the display time mode, press the "return key" clock to switch between the 12H/24H two time display formats repeatedly.
This setting is valid in time display mode.
Auto-memory after setting, automatically remember the time format you set after restarting or power off.
Switching Temperature Unit Format ℃/℉
In the display temperature mode, press the "return key" clock to switch repeatedly between two temperature units of Celsius and Fahrenheit.
This setting is valid in the display temperature mode.
Auto-memory after setting, automatically remember the temperature unit you set after restarting or power off.
Switching Backlight Mode
In any mode of display, long press "MODE key" background light in constant light, breathing, random, gradual movement, close and switch repeatedly.
Auto-memory after setting. Auto-memory of the background light mode you set after restarting or power off.
Switching buzzer mode
In any mode of display, long press "mute key" to switch the working mode of buzzer, one is mute, the other is buzzer sound.
The default buzzer sound will not be automatically remembered after setting up.
Switch on/off automatic timing switch mode
In any mode of display, long press "power key" to switch on/off automatic timing switch mode.
Auto-memory after setting. Auto-memory after restarting or power off can automatically remember the mode of opening/closing auto-timer switch you set.
Setting time
In the display time mode, press "MODE key" to enter the setting state. After entering, it will flicker. At this time, it can switch the position of adjustment by pressing "Quick Back" and "Quick Forward" buttons. When the hour flickers, it means the current adjustment hour, while the minute flickers indicates the current adjustment minute.
When setting the time, it will be displayed according to the 12H/24H display format you set.
set alarm
In display alarm mode, press "MODE key" to enter the setting state. After entering, two tubes on the left will flicker (two hours on the left and two minutes on the right). Press "Quick Back" and "Quick Forward" to switch the position of adjustment. The hour flicker indicates the current adjustment hour, and the minute flicker indicates the current adjustment minute. Press "+key" and "-key" to adjust the corresponding number increase and decrease. The "pause button" corresponds to the opening/closing of the alarm clock (different sounds).
Setting up automatic memory.
Setting Timing Switch Function
In the display timing switch time mode, press "MODE key" to enter the setting state. After entering, two tubes on the left will flicker (two hours on the left and two minutes on the right). Press "Quick Back" and "Quick Forward" to switch the position of adjustment. The hour flicker indicates the current adjustment hour, and the minute flicker indicates the current adjustment minute. Press "+key" and "-key" to adjust the corresponding number increase and decrease. The "pause button" switches back and forth between start time and end time of boot.
Setting up automatic memory.
GPS Time Calibration
GPS acquires precise UTC time, inserts the GPS module, and updates the time when the actual time of acquisition differs from the display time by one second. Without setting the time zone, GPS automatically acquires the direct updating time of the time zone.
Setting Digital Switching Effect
Press "MENU key" to switch back and forth between gradient effect/alternate effect/digital rolling effect/standard effect.
Automated memory after setting, restart or power off can automatically remember the digital switching effect you set.
Setting time, date, temperature switching time
In the mode of display time, date and temperature switching time, press "MODE key" to enter the setting state. The first is time, the second is date, the third is temperature, and the last is opening/closing state. At this time, you can switch the position of adjustment by pressing "Quick Back" and "Quick Forward" buttons. When the hour flickers, it indicates the current adjustment hour. When the hour flickers, it indicates the current adjustment minute, it adjusts accordingly by pressing "+key"-key". The number increases and decreases.
(Time parameter 0-9, date 0-9, temperature 0-9).
In the mode of display time, date and temperature switching time, press "Return key" to enter the setting of open/close automatic switching display state (the last pipe shows 0 means close, otherwise open).
Setting up automatic memory.
Setting photosensitive parameters, automatic brightness/manual brightness
In the mode of displaying photosensitive parameters, press "MODE key" to enter the setting state. The first is to turn on/off the brightness of the photosensitive detection and then turn on/off the screen display (0 means off, 1 means open, note: the priority of photosensitivity is higher than that of the automatic switch); the second is to indicate the level of the photosensitive detection brightness (1-9 level); and the third is to indicate the manual brightness (1-9 level, the brightness level of display, the lower the number, The more the brightness is pressed; the fourth means to turn on/off the automatic brightness (automatically adjust the display brightness by inducing the ambient brightness, 0 means to turn off, 1 means to turn on, after setting the automatic brightness, the manual brightness is invalid); Press "MODE" to enter the setting state, at this time you can press "Quick Back" and "Quick Forward" to switch the adjustment position, and press "Quick Forward" to change the adjustment position.“+ The number of key "- key" adjustments increases and decreases accordingly.
Setting up automatic memory.
