Condition:New
Type:Logic ICs
A:
Industrial grade nine-in-one magnetic isolation converter
One channel transfers multiple interfaces at the same time
More professional 3KV isolated interface conversion data converter
Product Features:
●Baud rate: RS232 (300 bps～235kbps), TTL, RS485 and RS422 (300 bps～500kbps);
●Interface interchange: USB<>RS232<>RS485/422<>TTL interface interchanges and receive signals at the same time;
●Isolation scheme: adopts ADI's iCoupler high-performance magnetic couple isolation scheme;
●Output interface: RS232 (three-wire mode) DB9 interface, TTL, RS485 and RS422 terminal interface;
●Power output: provide 5V and 3.3V output;
●Earth interface: Provide an earth connection port for lightning protection;
●Isolation voltage: 3000Vrms;
●Channel isolation: magnetic isolation between RS232, RS485/422, TTL and USB;
●Interface solution: ultra-stable FT231XS chip, high-performance RS232, RS485 interface chip;
●Load performance: RS485/RS422 can be connected to 128 nodes (if supported by the load);
●Output protection: lightning protection GDT+TVS protection+filter network; three-level protection;
●Power supply range: 4.75～5.25V, about 100mA;
●Work instructions: power supply instructions, data instructions;
●Operating system: support Windows, Linux, MAC;
●Working temperature: -40℃～85℃ industrial grade;
●Installation method: standard guide rail buckle installation;
●Warranty policy: one year warranty, lifetime cost maintenance;
●Mechanical size: 112.5*72*25.5mm (length*width*height).
Include:
1.USB to RS232, USB to RS485, USB to RS422, USB to TLL;
2.RS232 to RS485, RS232 to RS422, RS232 to TTL, RS232 to USB;
3.RS485 to RS232, RS485 to TTL, RS485 to USB;
4. RS422 to RS232, RS422 to TTL, RS422 to USB;
5. TTL to RS232, TTL to RS485, TTL to RS422, TTL to USB.
------------------------------------------------------------------------------------------------------------
B：
Not isolated from each other
------------------------------------------------------------------------------------------------------------
C:
Ultra-high-speed 12M 5-in-1 3KV isolation
USB<>RS485/RS422/RS232/TTL
POWER:1.8V&3.3V&5V
Product parameters:
1. Baud rate: TTL (110-12Mbps), RS485/422 (110-12Mbps), RS232 (110-470K);
2. Interface scheme: Optimum industrial-grade FTDI FT232HL high-speed control chip;
3. Rated isolation voltage: 3000V RMS;
4. Output interface: standard TTL, RS-232 (3-wire), RS-485/422 (half duplex);
5.TTL voltage: support 1.8V/3.3V/5V level;
6. Output power: 1.8V/3.3V/5V can be output (with current follow);
7. Optimizing 600W high-speed TVS, effectively suppressing RS485/422 communication interface;
8. Interface protection: three-level protection, PTC+TVS+GDT;
9. Strengthen GDT lightning protection, and connect to the earth EARTH terminal;
10. Fully support Winxp, Win7/8/10, MacOs-x, Linux (2.6.39 or Later) system;
1. Built-in l20Ω terminal resistance, can be used to configure the jumper cap;
12. Work instructions: power supply instructions, sending instructions, receiving instructions;
13. Working temperature: -40℃-85℃ industrial grade;
14. Size: 112x70x26MM (length x width x height).
Product Features
1. High speed: 485/422 data transmission up to 12Mbps, support 7/8 bit data, 1/2 stop bit and
Odd/Coupling/Mark/Space/No parity, independent baud rate generator.
2. Stable: Imported FTDI industrial-grade chip FT232HL, active crystal oscillator clock, and industrial-grade components are preferred.
3. Reliable: MORNSUN 3kv power supply isolation, 3kv signal digital isolation, and imported 485/422 chips. GDT strengthens lightning protection, three-level interface protection.
------------------------------------------------------------------------------------------------------------
D:
Ultra-high speed 12M, 4 channels, 4 independent serial ports,3kv
------------------------------------------------------------------------------------------------------------
E:
Ultra-high speed 12M, 2 channels, 2 independent serial ports,3kv
