Condition:New
Type:Logic ICs
Product Features:
1. Time display (12H/24H, 2 display modes, automatically saved after adjustment)
2. Date display (YY-MM-DD year, month, day, MM-DD-YY, month, day, year, DD-MM-YY, day, month, year, 3 display methods, automatically saved after adjustment)
3. Temperature display (Celsius ℃ / Fahrenheit ℉, two display methods, automatically saved after adjustment; the temperature sensor is placed inside the temperature higher than the outside, if you want a more accurate temperature, you need to connect the DS18B20 to the outside with a wire)
4. Alarm clock function (can be turned on/off, automatically saved after adjustment)
5. Timing switch machine (divided into 3 time stages, convenient for the display of the time in the morning, midnight and evening. The timing switch machine can be turned on or off (that is, it is always on). It needs to be confirmed after adjustment. If the time is not normal, (Buzzer prompts error sound)
6. Fluorescent tube digital test (adjustable display 0-9 is convenient to test whether it is intact, or whether the welding is intact, the default is 0 when it is turned on)
7. RGB mode under the tube (the RGBled under the display tube can be turned on/off, and the default breathing effect is on when it is powered on)
①One color (7 colors can be switched)
② Breathing effect
③Turn off the RGB effect
8. Equipped with infrared remote control, wireless operation is convenient and quick.
9. Using high-precision clock chip, timing is accurate.
10. Built-in lithium battery, the time is not chaotic after power off.
Technical specifications
Input voltage: 5V (DC 5.5*2.1 plug)
Fluorescent tube model: IV-22/NB-22
Acrylic size: 220mm * 60mm * 50mm
Shell material: solid wood shell + acrylic back cover
Infrared remote control introduction
Display mode switch
1. "Number 1 key", the clock enters the display time.
2. "Number 2 key", the clock enters to display the Gregorian calendar (Gregorian calendar) date.
3. "Number 3 key", the clock enters to display the alarm time.
4. "Number 4 key", the clock enters the display temperature.
5. "Number 5 key", the clock enters the display fluorescent tube test.
6. "Number 6 key", the clock enters to display the timing switch time.
7. "Number 7 key", the clock enters the display time, date, temperature switching duration setting.
(■ Note: The remote control will automatically switch back to display time mode after 10 seconds of inactivity)
Switch time format 12H/24H
In the time mode, press the "return key" to switch the clock repeatedly between the 12H/24H time display format.
■ This setting is valid in time display mode.
■ Automatically memorize after setting, and automatically memorize the time format you set after restarting or power off.
Switch date format YY-MM-DD/MM-DD-YY/DD-MM-YY
In the Gregorian calendar date mode, press the "return key" to switch the clock repeatedly between YY-MM-DD/MM-DD-YY/DD-MM-YY three formats.
■ This setting is valid in the display mode of the Gregorian calendar date.
■ Automatically memorize after setting, and automatically memorize the date format you set after restarting or powering off.
Switch temperature unit format ℃/℉
In the temperature mode, press the "return key" to switch the clock repeatedly between the two temperature units of Celsius ℃ / Fahrenheit ℉
■ This setting is valid in the display temperature mode.
■ Automatically memorize after setting, and the temperature unit you set can be memorized automatically after restarting or power off.
Toggle the backlight mode
In any mode, press the "8 key" and the background light will switch repeatedly between steady on, breathing, and off.
■ The setting has no memory, the default is the breathing effect after power-on.
Set time
In the time mode, press the "MODE key" to enter the setting time state. After entering the setting time state, the hour will flash, when the hour flashes, it means the current adjusted hour, the minute flashing means the current adjusted minute, and the second flashing means the current adjusted second. Press the "+ key" "- key" to adjust the corresponding number to increase or decrease, press the "MODE key", no adjustment/hour/minute/second adjustment, the four states switch back and forth in turn.
■ When setting the time, it will be displayed according to the set 12H/24H display format, so please pay attention.
Set date
In the date mode, press the "MODE key" to enter the date setting state. After entering the setting date status, the year will flash. When the year flashes, it indicates the current adjustment year, the month flashes indicates the current adjustment month, and the day flashes indicates the current adjustment day. Press "+ key" "- key" to adjust the corresponding number to increase or decrease, press "MODE key", no adjustment/year/month/day adjustment, the four states switch back and forth in turn.
■ When setting the date, it will be displayed according to the display format of YY-MM-DD/MM-DD-YY/DD-MM-YY you set. Please pay attention.
Set an alarm
In the alarm mode, press the "MODE button" to enter the state of setting the alarm time. After entering the state of setting the alarm time, the two tubes in the middle will flash (the alarm only displays the hours and minutes, the two in the middle indicate the hours, and the two on the right indicate the minutes). When the hour flashes, it indicates the current adjusted hour, and the minute flashes indicates the current adjusted minute. Press the "+ key" and "-key" to adjust the corresponding number to increase or decrease, without adjusting/adjusting hours/minutes, the three states switch back and forth in turn, press the "pause key" to turn on/off the alarm clock (the first two tubes display"-- "Means turn off the alarm clock, otherwise turn on the alarm clock).
■ Set automatic memory.
Switch on/off automatic timing switch mode
In any mode, press the "power button" to switch on/off the automatic timing switch mode, the 6 LED hours in the standby state will light up green, and the tube will not display.
■ Automatically memorize after setting, and automatically memorize the on/off automatic timing switch mode you set after restarting or power off.
Set timer switch function
In the timer switch time mode, press the "MODE button" to enter the state of setting the timer switch time. After entering the state of setting the timer switch time, the middle two tubes will flash (the timer switch time only displays hours and minutes, the middle two indicate hours, and the right two indicate minutes), press "+" and "-" to adjust The corresponding number increases or decreases, press the "MODE button", no adjustment/hour adjustment/minute adjustment, the three states switch back and forth in turn.
The timer switch time is divided into 3 stages. The "return button" switches the time period in sequence, and increases from 0-2 each time it is pressed (the first tube is displayed); the "pause button" corresponds to the start time of booting/ The end time is switched back and forth (the second tube displays 0 for the start time, and 1 for the end time).
■ The time of the three phases must be logical, that is:
The first start time ≤ the first end time;
The second start time ≤ the second end time;
The third start time ≤ the third end time;
The first end time ≤ the second start time;
The second end time ≤ the third start time;
■ The setting will not be automatically memorized. When the setting is completed, you need to press the "OK button". If it does not conform to the logic, the data will not be saved.
Set time, date, and temperature switching duration
In the time, date, and temperature switching duration mode, press the "MODE key" to enter the setting state. The first two are the time, the third is the date, the fourth is the temperature, and the last is the on/off status. Press the "+ key" and "- key" to adjust the corresponding number to increase or decrease, press the "MODE key", no Adjust / adjust time / adjust date / temperature, the four states switch back and forth in turn.
(Time parameter 1-60, date 0-9, temperature 0-9).
In the display time, date, and temperature switching duration mode, press the "back button" to enter the setting on/off automatic switching display state (the last tube shows 0 to indicate off, otherwise it is on).
■ Set automatic memory.
