Condition:New
Type:Logic ICs
Products include: coil, power supply, 3.5mm audio butt wiring
Finished products for sale, plug and play
Power supply and power consumption: DC40V, 1700mA
Output frequency: 1.5MHz ± 5%
Audio signal: ordinary audio
input method:
**Bluetooth,
** AUX cable (3.5mm)
Power adapter specifications:
Enter:
AC100-240V / 50-60Hz
Output: DC40V1800mA
volume:
Length 78 width 78 height 208 (mm4
package volume:
230 × 140 × 160
Gross weight: ≤900g
Music Tesla Coil: A small Tesla coil generates a high-frequency high-voltage electric field during operation and generates an arc through the discharge electrode.
The high-frequency electric field radiates outward in the form of electromagnetic waves, which is enough to excite gas-based cold light lamps to emit light. And it will interfere with the surrounding electronic equipment and affect its normal work.
The audio signal is introduced into the coil, and audio modulation is performed in the form of a Class A power amplifier. The output arc will change with the audio signal and vibrate the air to make a sound.
Product description: 1. Small size, high power, clear sound quality and bright sound. No grounding required, plug and play.
2. High efficiency and low energy consumption; the typical structure of signal source + drive + power amplifier is adopted, and the latter is a class E amplifier with high efficiency.
3. The primary coil is wound with multiple wires, which improves the high-frequency Q value, and the number of coil turns is large, ensuring a high degree of coupling coefficient in the primary stage.
4. Reasonable circuit structure, wide voltage adaptation range, no failure caused by power initialization problems.
5. Exquisite appearance, production process including laser, turning, milling, drilling, etc., each link is strictly controlled to ensure product quality.
Operating requirements: (please follow the procedure for the first use) 1. Install only one electrode needle, straight needle or rotary needle.
2. Power adapter, connect the coil, make sure the plug is in place.
3. Connect the power cord and adapter, and finally connect to the mains.
-Normal coil arcing can confirm that it works normally, and then do audio input operation-
4. Power off. Just disconnect the mains connection
5. Connect the audio cable to the player and the coil, and plug it in place.
6, the player outputs audio signals, you can first adjust the volume to the maximum (in the future can be adjusted according to actual needs).
7, access to the mains, you can achieve the music function.
*** The arc is normal and there is no sound incense *** This problem is basically that the coil interference player does not work properly. The solution:
1. According to the operation process, the connection line is plugged in place
2. For another player, it is best to use a small mobile device such as a mobile phone or MP3.
Safety requirements: 1. It is strictly forbidden to use the coil in flammable and explosive environment.
2. Do not touch the electrodes directly with your hands during work, it will burn your skin.
3. The high-frequency and high-voltage electric field can discharge any conductive body or non-conductive body. It is strictly forbidden to touch the secondary of the coil with any object and keep a safe distance of more than 2 cm.
4. When the coil works, it will cause serious disturbance to the surrounding electronic products. Please pay close attention to the environmental requirements and adapt to the crowd.
5. It is strictly forbidden to run with power on without any personnel.
6. After working, the temperature of the electrode needle is high. Do not touch it immediately.