RS485 infrared carbon dioxide, CO2, illuminance, temperature, humidity, sensor, controller four in one

Type:Logic ICs
Condition:New
Color classification:white

Product features

YS9565B carbon dioxide, light intensity, temperature and humidity, the four in one sensor is RS485 bus type sensor. It is a special sensor for agricultural greenhouse designed for environmental monitoring in the process of agricultural production. The instrument can continuously monitor 4 environmental parameters, such as carbon dioxide gas concentration, light intensity and ambient temperature and humidity, and convert them into MODBUS-RTU standard RS485 signals and transmit them to associated equipment. The sensor can be equipped with off limits sound and light alarm equipment.

1And CO2 sensors are adoptedDual channelDetection of carbon dioxide non dispersive infrared gas detection technology concentration, has high measurement accuracy, good repeatability, wide measuring range, long service life, no other background gases (CH4, H2S, SO2, N2, O2) effect etc..

2The high performance single-chip microcomputer and high integration digital circuit are adopted in the design of the sensor. The structure is simple, the performance is reliable, and the debugging and maintenance are convenient.

3The sensor can be continuously detectedCarbon dioxide, light intensity, temperature, humidityYou can also use the out of gauge alarm output function.

4The sensor is designed with low power consumption and long distance.

5The outer shell of the sensor is designed with high strength and strong shock resistance.

Use note

1.The built-in CO2 sensors are part of the deviceDual channelNon dispersive infrared carbon dioxide sensors require full ohmic heating to achieve good service conditions. We recommend that you preheat for at least 3 minutes.

2.The product is used in the greenhouse, the mushroom house, the environment, the air quality control multi-function detection device. Carbon dioxide concentrationIlluminance, temperature, humidityFor detection of carbon dioxide gas sensitive components, the concentration range was 0~5000ppmThe illuminance is 0~65535LuxAnd the temperature is -40~+120CThe humidity is 0 ~ 100%RH.

technical parameter

Serial number	parameter	Technical index
1	Protection level	IP63
2	Carbon dioxidemeasuring range	0~ 5000 PPM
3	Carbon dioxidemeasurement accuracy	+ 100 PPM
4	Range of temperature measurement	-40~+120C
5	Temperature measurement accuracy	0.5 DEG C
6	Range of moisture measurement	0~ 100%RH
7	Humidity measurement accuracy	+ 4.5%RH
8	Illuminancemeasuring range	0~65535 lux (can be customized 0-20luxRange)
9	Illuminancemeasurement accuracy	+ 3%FS (25 DEG C)
10	output signal	Mod bus RS485
11	baud rate	9600
12	Power supply	DC7-36V
13	Power waste	< 4W
14	Out of gauge output	Alarm or relay control (custom-made)
15	Working environment temperature	-30C~ +85 degrees centigrade
16	Working environment humidity	0~ 100%RH
17	size	153*90*55mm

Installation size