Switching data acquisition, input and output module, transistor output, 7 inputs, 8 outputs|ic0A629|Electronic products

Details
Reviews
Tags
FAQ

Type:Logic ICs
Condition:New
Model:YX6050
No.:YX6050
Decoration and construction contents:Installation engineering

The switch input and output module can detect 7 channel switching status, 8 switch output (open collector), module with RS485 bus, MODBUS-RTU protocol, and is used in various industrial measurement and control system.

I. main performance profiles

YX6050 module can be widely used in various industrial measurement and control systems. It can from the host computer, the main controller through the RS-485 interface to receive the digital input, conversion switch output signal, control relays, switches and so on; and the state of switch switch input signal back to the computer. Its MODBUS-RTU and ASCII code communication instruction set is compatible with NuDAM, ADAM and other modules, and can be linked with the control module of other manufacturers on the same 485 bus, so that it is easy for computer programming. Its function and technical indexes are as follows:

Switch input7 input, logic level 0:0 ~ +0.5V or short, logic level, 1:+3.5V~+30V or open circuit.

Switch output8 output, triode open circuit, suction current 100mA, power consumption: 500mW.

Communication interface:

Interface: RS-485 interface, two-wire system, + 15KV ESD protection.

Protocol: Double protocol, ACSII code format and MODBUS-RTU protocol

Speed: 1200, 2400, 4800, 9600, 19200 Bps, software settings.

-Module address: 00~FF software settings.

-Module power: +8~24V DC * power dissipation: 0.2W, typical current consumption of 15 mA.

-Work environment:Operating temperature: -20 DEG C ~70 DEG C; storage temperature: -40 DEG C, ~85 C; relative humidity: -5%~95%, no condensation

-Installation method:DIN rail clamping volume: 122mm *70mm * 43mm.