Condition:New
Type:Logic ICs
In the 2019 edition, the third generation of new meteorological module is on the market!!!
New products, 2019 3rd generation high-precision meteorological interface board, 8K CPU, big data operation, support two kinds of data output, British data is convenient to link APRS equipment, metric professional measurement data is convenient for user secondary development, high-precision temperature and humidity sensor, wind speed and rainfall measurement accuracy.
Preferential price Special offer Sensors for Internet of thingsMeteorological station suite.
The 10pcs contains:
1. Wind speedSensor, white box size 15X16.5X8CM
2. Wind directionsensorWhite box size 18.5X14X6.5CM
3.rain sensorWhite box size 9.5X15.5X6.5CM
4, stainless steel vertical pole 1, single length 30CM
5, bar length 29CM
6. Rainfall support
7, bandage
8. Stainless steel hoop
9. Loosening screws
10.Three Generation Temperature, Humidity and Pressure Modules
10pcs:Three Generations RS485 MODBUS Version + Wind Speed, Wind Direction and Rainfall：
????
Three Generation Meteorological Modules in 2019 MODBUS:
???
Three Generation Meteorological Modules in 2019 TTL:
??
??????
???
Optional digital Illumination sensor:
51WS3 weather interface module data storage and calculation instructions??Rainfall: The 51WS3 weather interface board has a built-in 1440-byte rain-specific data buffer that records the rain sample value per minute.?After rolling calculation, the rainfall value of the previous minute, the first hour, and the first 24 hours is obtained.?Wind speed: The 51WS3 weather interface board has a built-in 300-byte wind speed dedicated data buffer to record real-time wind speed samples per second.?After rolling calculation, the real-time wind speed, the average wind speed in the first 1 minute, and the highest wind speed in the first 5 minutes are obtained.?Temperature: Read temperature, humidity and pressure data every 5 seconds?note:?JP1 short circuit = ARS inch mode, JP1 open circuit = professional metric mode?JP2 short circuit = 2400 rate, JP2 open circuit = 9600 rate?Output one measurement data at intervals of 0.5 seconds.?APRS data output format (imperial, default):?C000s000g000t082r000p000h48b10022*3C??Output 38 bytes every 0.5 seconds, including newline at the end of the data (OD, OA)?data analysis:?C000: wind direction angle, unit: degree.?S000: wind speed in the first minute, unit: miles per hour?G000: the highest wind speed in the first 5 minutes, in miles per hour?T086: temperature (Fahrenheit)?R000: rainfall in the previous hour (0.01 inches)?P000: rainfall (0.01 inches) in the first 24 hours?H53: humidity (00% - 99%)?B10020: air pressure (0.1 hpa)???*20 checksum, all character XOR results between A and * (excluding *)?The interface board will automatically detect whether the air pressure gauge, temperature and humidity sensor are installed, and the sensor data that is not installed will display “...”.?For example, if the temperature and humidity sensor and the air pressure piece are not installed, the output data is:?C000s000g000t...r000p000h..b.....?Meteorological module supports automatic identification of particulate matter sensor PMS5003 PMS5003ST???Default data format with checksum data format: c000s000g000t086r000p000h45b09963*31???When it is detected that the PMS5003 is installed, the data is output:???Contains PM2.5 and check data format: c000s000g000t082r000p000h43b09985, 027,035,040,023,032,040,*14?Professional measurement data output format (metric):?Short JP1 is JP1=0 inch, open JP1, ie JP1=1 metric???After power-on, enter the professional measurement mode to facilitate secondary development.???DATA data interface 9600, 2400 rate?Professional measurement data format:?A4095B000C0000D0000E0000F0000G0000H0000I0000J0000K0000L0281M576N10024*27?Output 74 bytes every 0.5 seconds, including line breaks at the end of the data (OD, OA)???data analysis:?A0789: Wind direction measures AD value in real time (0-4095)?B000: Wind direction angle value (16 directions)?C0000: real-time wind speed frequency 1Hz?D0000: Real-time wind speed 0.1M/S?E0000: Average wind speed in the previous minute 0.1m/s?F0000: The highest wind speed in the first 5 minutes 0.1m/s?G0000: Real-time rain bucket, 0-9999, loop count?H0000: The number of rain buckets in the previous minute, 0-9999?I0000 : The first 1 minute of rainfall 0.1mm?J0000: The previous hour's rainfall 0.1mm?K0000: The first 24 hours of rainfall 0.1mm?L0209: Temperature (degrees Celsius), 0.1 degree, below zero, the first digit displays the symbol "-".?M703: Humidity 0.1 (0% = 99%)?N10233 air pressure (0.1 hpa)???*27 checksum, all character XOR results between A and * (excluding *)?51WS3 calibration adjustment function?The 51WS3 supports the calibration adjustment data function, which can be used when the original data value needs to be adjusted in some special circumstances.???The factory default of 51WS3 is that the temperature, humidity and air pressure are all raw data output, that is, no increase or decrease.?1. Connect the USB to TTL data cable (optional), connect 51WS3, open the universal serial port debugging software, and select the correct port number, the rate is 9600.???2, send the command AT+SET=T+000H+000B+0000 Enter, that is, the setting is completed.?Note: All setup commands must be + Enter (ENTER).???Command: AT+VER=? Enter?Description: Display the current firmware version number?????Command: AT+SET=T+000H+000B+0000 Enter?Description: Addition and subtraction of temperature, humidity and barometric raw data???Detailed instructions?AT+SET=T+000H+000B+0000?T+000 means temperature +00.0 degrees (unit: Celsius), calibration range +-99.9?Note: This calibration value is metric Celsius.?H+000 means humidity +00.0%, calibration range +-99.9?When calibrating addition, if the measured humidity + calibration value exceeds 99.9%, it is fixed at 99.9%.?When calibrating subtraction, the subtraction is allowed if the humidity > correction value is measured.?B+000 means air pressure +000.0hpa, calibration range +-999.9hpa???Example:?Raw data: c000s000g000t082r000p000h49b09957?Settings: AT+SET=T+000H-080B-1000 Enter?New data: c000s000g000t082r000p000h41b08957???51WS3 weather interface module data storage and calculation instructions?Rainfall: The 51WS3 weather interface board has a built-in 1440-byte rain-specific data buffer that records the rain sample value per minute.?After rolling calculation, the rainfall value of the previous minute, the first hour, and the first 24 hours is obtained.?Wind speed: The 51WS3 weather interface board has a built-in 300-byte wind speed dedicated data buffer to record real-time wind speed samples per second.?After rolling calculation, the real-time wind speed, the average wind speed in the first 1 minute, and the highest wind speed in the first 5 minutes are obtained.?Temperature: Read temperature, humidity and pressure data every 5 seconds?
