Time tube Glow tube Quasi-glow tube clock LED digital solid wood Chinese night light bar atmosphere light Brightness adjustable

Condition:New
Type:Logic ICs
Explanation:Brightness setting:Step 1: Press the EFF key once, all the tubes flash, press the + or-key to increase or decrease the brightness;Step 2: Press the EFF key twice to complete the brightness setting;Step 3: Press the EFF key three times to scan the global brightness and enter the state of automatic brightness adaptation;?Clock / alarm settings:--Press the SET button once to enter the hour value setting state of the clock, the clock hour bit flashes, and the rest are displayed normally, press the + or-button to set;--Press the SET key twice to enter the minute setting state of the clock, the minute bit of the clock blinks, and the rest is displayed normally, press the + or-key to set;--Press the SET button three times to enter the hour value setting state of the alarm clock, the hour bit of the alarm clock flashes, and the remaining tubes are off, press the + or-button to set;--Press the SET button four times to enter the minute value setting state of the alarm clock, the minute bit of the alarm clock flashes, and the remaining tubes go out, press the + or-button to set;--Press the SET key five times to complete the clock / alarm setting;PS. The alarm is set to 00:00 to turn off the alarm;
?Amber color version：








?Full color version:

?Cirucuit board:

. Provide more than ten kinds of color matching modes, free switching

. Can customize each tube body color

Custom tube body color settings:

Step 1: Press the EFF key twice, the first tube flashes, and the unset tube is off. Press and hold the + key to set the color;Step 2: Press the EFF key again, the second tube flashes, and the tube is not set to go out. Press and hold the + key to set the color;-------Step 6: Press the EFF key again, the sixth tube flashes, press and hold the + key to set the color;Step 7: Press the EF key again to complete the tube color setting;?Brightness setting:Step 1: Press the EF key once to display the brightness of the tube (0-100);Step 2: Press + or one key to increase or decrease brightness;About 3 seconds after setting, it will automatically return to normal display?Clock / alarm settings:--Press the SET button once to enter the hour value setting state of the clock, the clock hour bit flashes, and the rest are displayed normally, press the + or-button to set;--Press the SET key twice to enter the minute setting state of the clock, the minute bit of the clock blinks, and the rest is displayed normally, press the + or-key to set;--Press the SET button three times to enter the hour value setting state of the alarm clock, the hour bit of the alarm clock flashes, and the remaining tubes are off, press the + or-button to set;--Press the SET button four times to enter the alarm minute setting state, the minute bit of the alarm clock flashes, and the remaining tubes are off. Press the + or-button to set;--Press the SET key five times to complete the clock / alarm setting;PS. The alarm is set to 00:00 to turn off the alarm;