Tipper type rain sensor ABSstainless steel metal material optional pulse switch quantity and 485 output type Rain gauge

Condition:New
Type:Logic ICs
Model Number:Rain gauge
Supply Voltage:5-24V DC or 7-24vDC
⊙Specification specifications
The instrument consists of a rain cover component and a metering component. The rain inlet adopts the mouth Φ200mm. The metering component is a tipping-type mechanical bistable weighing mechanism that converts the depth of rain in mm into a switching signal output. Patented insect net, anti-blocking design, built-in level, double dry reed. Winter bucket cover, floor mount and bracket can be selected.

⊙Scope of application
The QS-1501 tipping bucket rain sensor is a hydrological and meteorological instrument used to measure rainfall in the natural world, while converting rainfall into digital information output in the form of a switch to meet information transmission, processing, recording and display. Wait for the needs. It can be used in meteorological stations (station), hydrological stations, agriculture and forestry, national defense, field surveying stations and other related departments to measure precipitation, precipitation intensity and precipitation time with the rainfall recorders independently developed by our company. It can provide raw data for flood control, water supply dispatching, and water management of power station reservoirs.

⊙Technical parameters
◆ Rain bearing diameter: φ200mm ◆ Material: high quality ABS and stainless steel optional
◆ Measuring range: ≤30mm/min ◆ Permitted current: 5mA
◆ Resolution: 0.2mm
◆ Error: ±2%
◆ Output signal: single reed switch (internal filter circuit)
◆ Power supply: 5-24V DC 7-24vDC (485 output)
◆ Weight: about 1kg
●The chassis is mounted on the bracket hole bitmap


⊙Special tips:
When the rain gauge is removed from the package, install the cover counterclockwise to separate the outer casing from the chassis. At this time, cut the cable tie on the inner bucket of the rain cylinder so that the bucket can be flipped freely, then reinstall the casing and rotate it clockwise. (The function of this cable tie is to avoid the dumping of the bucket during transportation. If you need to re-ship the rain gauge, please attach a cable tie to fix the dumpling at this position.)