Dissipation Power:W
Supply Voltage:V
Type:Logic ICs
Condition:New
Application:0
Interface property:USB to serial port
Whether external power supply:No external power supply

RJ3013 is a universal USB/RS-485/422 converter, without external power supply, compatible with USB, RS-422, RS-485, USB signal can be converted to single end balance RS-422 or RS-485 signal, each power line surge protection, as well as a variety of reasons on the line surge voltage and minimum interelectrodecapacitance guarantee the high speed transmission of RS-422/RS-485 interface, RS-422, RS-485, DB9 and RJ-45 connected by the connector male head. Inside the converter with zero delay automatic transceiver conversion, automatic control and data flow direction I/O circuit is unique, without any handshake signals (such as RTS, DTR etc.) jumpers set full duplex (RS-422), half duplex (RS-485) mode switch, plug and play. To ensure that all existing communication software and interface hardware are suitable.
Interface converter can provide a reliable connection is point-to-point, point to multipoint communication, point to multipoint each converter allows to connect 32 RS-422 or RS-485 interface equipment, 300-128000bps data communication rate, with power indicator and data flow indicator can indicate the fault situation, support the communication mode of USB to RS-422 USB to RS-485 conversion.

Standard: with USBV1.1, 1, 2, RS-485, RS-422TIA/EIA
- USB: VCC, DATA+, DATA- signal, GND, FG
- RS-485: T/R+, T/R-, GND signal
- RS-422: TXD+, TXD-, RXD+ signal, RXD-, GND
- work mode: asynchronous, point-to-point or multipoint, line 2, line 4 half duplex full duplex
In the direction of control: using data flow automatic control technology, automatic control and data transmission
- baud rate: 300-921.6bps, automatic test signal rate
- load capacity: support to more each converter allows to connect 32 RS-422 or RS-485 interface equipment
- transmission distance: RS-485/422 terminal 1200 meters (9600bps), USB port is less than 5 meters
- interface protection: surge protection, 15KV protection.
- Interface: USB interface end of a male connector, DB9 male connection
- signal indication: 2 signal lights to send (TXD) receiver (RXD)
- transmission media: twisted pair or shielded wire
- size: 1555mmx36mmx16mm
In the use of the environment: -40 DEG C to 85 DEG C, relative humidity of 5% to 95%
- transmission distance: 0-1200 meters (921600bps-300bps)
- support Win98/Win2000/WinXP/Vista/Win7/Linux