Condition:New
Type:Logic ICs
Interface Properties:USB-to-serial
If the external power supply:No external power supply

RJ3013 is a universal USB / RS-485/422 converter, no external power supply, compatible with USB, RS-422, RS-485 standard, the ability to single-ended USB signals into balanced differential RS-422 or RS-485 signals provide surge protection power per line, and the line for various reasons and the surge voltage generated between the minimum capacitance to ensure high-speed transmission of RS-422 / RS-485 interface, RS-422, RS-485 terminal connected via RJ-45 and DB9 male connectors. Converter with zero delay automatic send and receive internal conversion, unique I / O circuit automatic control data flow direction, without any handshaking signals (such as RTS, DTR, etc.) no jumper settings to achieve full-duplex line (RS- 422), half-duplex (RS-485) mode switch, plug and play. Ensure that it meets all existing communications software and interface hardware.
Interface converter for point to point, multipoint communication to provide reliable connectivity, multipoint each converter allows connecting 32 RS-422 or RS-485 interface devices, data communication speed 300-128000bps, with power indicator and data traffic lights can indicate a fault condition, the supported communication methods are USB to RS-422, USB to RS-485 converter.

Standard: USBV1.1,1.0,2.0 standard, RS-485, RS-422TIA / EIA standard
USB signal: VCC, DATA +, DATA-, GND, FG
RS-485 signal: T / R +, T / R-, GND
RS-422 signals: TXD +, TXD-, RXD +, RXD-, GND
Working mode: asynchronous operation, point to point or multi-point, 2-wire half-duplex, 4-wire full-duplex
Direction control: automatic data flow control technology, automatic identification and control data transfer direction
Baud rate: 300-921.6bps, automatically detecting the serial signal rate
Load capacity: support multipoint each converter allows connecting 32 RS-422 or RS-485 interface devices
Transmission distance: RS-485/422 terminal 1200 meters (9600bps time), USB port no more than 5 meters
Interface protection: surge protection, ± 15KV electrostatic protection
Interface Type: USB Type A connector ends Male, DB9 male connector connection
Signal indication: 2 signal lights transmit (TXD) receiving (RXD)
transmission media: twisted pair or shielded wire
Dimensions: 1555mmx36mmx16mm
Operating environment: -40 to 85 , relative humidity of 5% to 95%
Transmission distance: 0-1200 meters (921600bps-300bps)
Support Win98 / Win2000 / WinXP / Vista / Win7 / Linux, etc.