Condition:New
Type:Logic ICs
USB2.0 Optical Fiber Extender Product Manual
The USB20 optical fiber extender, also known as the USB20 optical transceiver, extends the transmission distance of USB2.0 SuperSpeed high-speed signals up to 480Mbps to 20km through a single optical fiber. The USB2.0 optical fiber extender uses a dedicated USB2.0PHY to meet the requirements of the USB2.0 protocol, and uses SFP+ to complete photoelectric conversion to achieve stable transmission of USB2.0 SuperSpeed high-speed signals.
The USB20 fiber optic extender consists of two parts: receiver and transmitter. The transmitter uses a USB2.0A type for power supply, and the receiver uses an external power supply, and provides power for USB2.0 devices through a USB2.0A type connector.
Products can be used in video conferencing, multimedia information release, government departments, medical systems, commercial displays, multimedia function halls, security monitoring, public utilities and other fields.
Application field：
Industrial video transmission
Machine vision system
HD video surveillance system
High-speed data acquisition system
Remote storage
Digital signage and TV wall
Industrial printer system
1. Fiber optic port
2.Link LED
3. USB2.0 port (connected with computer USB2.0 port)
4. Receiver power supply DC5V
5.Link LED
6. Fiber optic port
7.4xUSB2.0 downstream port
Product Features
◆USB2 O SuperSpeed signal transmission distance is extended to 20km (single-mode fiber)
◆Meet the 480Mbps bandwidth of USB2.0
◆Support all self-powered USB2.0 devices
◆Plug and play, no need to drive software
◆Adapt to all operating systems
◆USB2.0A type interface
◆Single fiber LC optical interface
◆Automatically recognize high-speed, full-speed pu-speed, low-speed Low-speed
Fiber interface: dual fiber LC
Optical wavelength: 1310nm
Dimensions (length X width X height): 78mm x44mm x23mmShell: aluminum alloy
Interface: 4xUSB2.0 interface
Supply voltage: DC 5V
Transmitter power:> 1.5W
Receiver power:> 2W (no load)
Data transmission distance: 20kmWorking temperature: 0℃-50℃
Storage temperature: -40-85℃
Humidity: 0-95% (no condensation)
Connect with computer (PC):After the USB2.0 optical fiber extender (computer>transmitter>receiver>power supply) is successfully connected, you can check (My Computer>Device Manager>Universal Serial Bus Controller) to see if the USB3.0 hub is displayed, and USB2.0 is displayed. 0 The hub USB2.0 optical fiber extender can be used normally.
USB2.0 high-speed extender*1 set (sending and receiving)
5V power adapter*1pcs
Fiber optic cable*1pcs
