Water immersion alarm, no positioning water leakage, controller with 485 output water leakage monitoring

Water Leakage Water Leakage detection equipment controller is a high performance, it can detect and cable installation, can and other

This item is not include the cable ,if need cable please buy by this link:

https://www.aliexpress.com/item/Water-Leakage-Alarm-Leakage-Monitoring-Water-Leak-Detection-Line-Water-Leakage-Sensing-Line/32854384836.html

detection probe supporting the use of the relay contact signal output, can be integrated with a variety of monitoring system, remote control and remote alarm equipment.Field wiring all installation can through the plug terminals to easily complete the module, the module design for leakage alarm output automatically reset after the elimination module with sensitivity adjustment function and a mute button. The water leakage controller is small in size, and is convenient for mounting rails or wall hangings.

Leakage controllerThe circuit system adopts highly sensitive components, which can not only guarantee the high sensitivity of the detection, but also avoid all kinds of external factors caused by false alarm, and also designed to have unique anti surge protection function. The module provides independent leakage alarm relay and outputs normally open or normally closed alarm signals. The module also has a buzzer mute switch, which can turn off the alarm sound according to the need.

Product features

Practical and reliable on-line liquid leakage monitoring.

• 12V DC power supply, to distinguish between positive and negative access.

Inductive sensitivity is infinitely adjustable.

This site produces sound and light alarm on site to quickly locate incident on the spot.

Relay output in the form of normally open, normally closed, coexistence at the same time, free choice.

Good anti-static and surge proof technology to ensure the reliable operation of the product.

Convenient 35mm DIN rail mounting method.

Appearance size: 58*115*36mm

Note:Each inspection cable is equipped with one3Meters long boot cable to facilitate and detect the host fast and stable connection.

Special mounting glue is used to fix the cable and the flat surface to ensure the accuracy and reliability of the cable inspection.

Special installation accessories (termination section, jump wiring, etc.), you can connect a number of inspection cables together, to form a complete detection network.

The utility model has the advantages of low cost and high reliability, and is suitable for various water leakage risk places.Two core non positioningInduction wire2A lightweight high-density polyethylene wire, pressed around a spiral shaft, has strong mechanical properties, corrosion resistance, and abrasion resistance;It is made of antiseptic and non-toxic material, and is in line with EU environmental protection standards.

I. features of leaky cable products:

process planning
Non positioningLeaky cableSpiral structure design can not only reduce the false alarm rate to reduce electromagnetic interference, but also greatly improve the cable strength and service life; not positioning Water Leakage cable manufacturing by special material, corrosion resistant, abrasion resistance, and can be used repeatedly.

Versatility
Non positioningThe water leakage sensing line is designed with two cores, which is generally used in any leak detection system based on short circuit principle. It can be applied to non positioning water leakage controller, as well as non positioning leak detection system of other brands at home and abroad.

Cascading convenience
Non positioningThe water leakage sensing line has a unique waterproof plastic plug, which can be cascaded to detect and cover any water on the cable. With a variety of length specifications to choose from, to meet the needs of various testing range. The cable is flexible and can be bent at any level.

Two: water leakage cable basic parameters: