Wind speed and direction recorder Real-time monitoring and automatic recording environmental meteorological data meter

Condition:New
Type:Logic ICs

Shape specification

Compact and lightweight, it is easy to carry and assemble.

Specifications are as follows:

Material

It adopts high-quality ABS engineering plastics and has the characteristics of good rigidity, good impact strength, heat resistance, low temperature resistance and chemical resistance.

Technical parameters

◆ Instrument size: 158 × 90 × 45mm

Wind speed range: 0~60m/s

Wind speed accuracy: ± 1m / s

Wind direction range: 16 directions (360 degrees)

Wind direction lead: three core

Wind direction output signal: voltage / current signal

◆ Recording capacity: > 7000

◆ Recording interval: 1 minute ~ 24 hours adjustable

◆Working environment: -20 ° C ~ 80 ° C

◆Power consumption of the whole machine: average working current <5mA

◆Power supply: six AA batteries or 7-12VDC (optional)

◆Communication interface: USB interface is convenient for data submission, free software from PC software.

Wiring definition

1. External interface:

Device installation

1. Access wind speed sensor:

Insert the plug of the wind speed sensor into the jack A on the left side of the cabinet as defined in the [Wiring Definition - External Interface] illustration.

2. Connect to the power adapter:

Insert the plug of the power adapter into the jack B on the right side of the chassis as defined in the [Wiring Definition - External Interface] icon.

3. Access to the host computer communication line:

Insert the plug of the serial communication cable into the jack C on the right side of the chassis as defined in the [Wiring Definition - External Interface] icon.

4. Access wind direction sensor:

Insert the plug of the wind direction sensor into the jack D on the left side of the cabinet as defined in the [Wiring Definition - External Interface] illustration.

Note: The above internal wiring definition is only for the needs of special situations. Generally, internal wiring is not required. Since the machine is waterproof, please be careful not to damage the internal wiring when installing the battery, so as not to affect the use. Non-special circumstances, non-professionals should not disassemble the case. In addition, if you have the conditions for continuous power supply to the mains, it is recommended that you use the mains supply.