ZVS high frequency induction heating module, high frequency machine, high frequency quenching small induction heating machine.|ic0A695|Electronic products

Details
Reviews
Tags
FAQ

Type:Logic ICs
Condition:New
Parameters: Working voltage:12-48V DC power supply; Maximum input current:20A; Input can be a 20A air switch,OneP or 2P can be, if you do not have a Taobao to take a picture, less than 10 yuan cheaper to return the package. PCB size:10.5CM* width 10CM; The weight of the kit is about: gram; After welding, the weight of the PCB is about:390 grams; [note] 1. If the circuit is to work continuously, a cooling fan must be added to cool the resonant capacitors, magnetic rings and other components by blowing down from above. In particular, capacitors work for a long time and heat up a lot. It is very irresponsible for some stores'products not to heat capacitors. 2. When using switching power supply, please note that the high power supply generally has the function of slow start, that is, the output voltage rises slowly after the start-up, and if the induction heating circuit is connected before the voltage rises to 10V, it will not start up because the start voltage is not enough, which will cause two MOS transistors to turn on at the same time and burn down the components. . So switch between the power supply and the heating circuit and switch it first. After 35 seconds, the voltage is stable and the switch is switched on to the induction heating circuit. 3. When heating iron rod or iron pipe or other objects, if using 40 mm diameter heating ring iron rod diameter should not exceed 10 mm, otherwise the circuit may be damaged due to excessive current. An ammeter can be added between the power supply and the heating drive plate to monitor the current. This induction heating circuit uses 12-48V low-voltage DC power supply, maximum input current 20A, maximum power 1000W in a short time. Long working powerFive00-800W. It can be used for heat treatment of small parts such as quenching and annealing by DIY players. (heating iron pipe diameter should not exceed 10mm). It can also be used with crucibles to melt gold, silver, copper, aluminum and other metals (crucibles are not sold in our shop, we can find them on Taobao). This circuit can directly heat iron, carbon steel, graphite, titanium alloy and other materials.The heating of copper, aluminum and stainless steel needs to be connected with the shopkeeper to customize the special heating ring. When the circuit works, the fan must be cooled and the copper pipe should be cooled by water. The outer diameter of the copper tube is 6 millimeters, the inner diameter is 4 millimeters, the coil is wound around 7 loops, and the inner diameter of the copper coil is 4 cm. Using demo video:... Uploading

Full package delivery list:
Name	Number
PCB parts or finished products	1
copper pipe	1
12025 fan 12V	1
Fan net	1
Fixed acrylic board	1
12V pump	1
Black damping ring of water pump	2
*58 silica gel hose**	2
DC005 seat	1
22# wire	1
*M310 double pass copper column**	4
*M335+6 copper column**	4
*M330 double pass copper column**	4
3MM gasket	5
*M36 screw**	15
*M330 screw**	5
12V 1A switching power supply	1

Physical picture of bulk shipment: Picture after welding:

The outer diameter of the copper tube is 6 millimeters, the inner diameter is 4 millimeters, the coil is wound around 7 loops, and the inner diameter of the copper coil is 4 cm. Picture of brass tube:

Photos of PCB + copper tube:
Picture of the complete set of finished products.
Baby does not include power supply, need to buy additional. Voltage heating effect 24V can melt lead and tin with a crucible. 36V uses crucible to melt aluminum. 48V uses crucible to melt gold, silver and copper.

ZVS high frequency induction heating module, high frequency machine, high frequency quenching small induction heating machine.

Price: $34.89

Add you Tags