Type:Logic ICs
Condition:New
item.taobao.com/item.htm? SPM = 0.0.0.0.sFuabT&id = 42212501837 MARVEL Studio
===========================================================
This induction heating circuit uses 12-54VLow Voltage DC Power SupplyMaximum input current 20A, maximum power 1000W, long-term power 600-800W. It can be used for DIY players to quench and annealing small parts, and can also be melted with our crucible.gold,silver,copper,aluminumEqual metals. It can melt about 250 grams of gold and 140 grams of gold.Silver or copper This circuit can directly heat carbon steel, graphite, stainless steel, copper, aluminium, titanium alloy and other materials. The specific heating parameters need to contact the shopkeeper to customize the special heating ring. Graphite crucibles are consumables and can be used more than 15 times as they are oxidized to carbon dioxide. When the circuit works, it must be cooled by fan, and the copper pipe should be cooled by water.Set 1 default matching 40mm heating ring, heating rod, pipe maximum diameter 10mm.
Package includes power and does not contain power, you can buy according to your own situation. The power supply is a dismantled communication power supply. It has been refitted with input and output sockets, power cord and air switch.
Quenching is recommended to buy package one and smelting metal is recommended to buy package two. If you want to buy a package in remote areas such as Yunnan, Guizhou, Gansu, Ningxia, Xinjiang and Tibet, please contact the shopkeeper to change the freight rate. Because one set meal weighs two kilograms and the other three kilograms, the freight is very expensive.
=============================================================
Voltage heating effect
24V crucible can melt lead and tin
36VCrucible can be used.meltAluminization.
48V crucible can be usedmeltGold, Silver and Copper
=============================================================
Heating circuit (PCB size 10x10cm):
Circuit Installation:
System Connection Method
Above is the power supply using Huawei. The actual power supply is Emerson, Huawei, ZTE and other brands. The appearance is different, but the parameters are the same. Because the source of goods does not necessarily issue which one.
Below are two other power wiring diagrams:
[Notes]
1. If the circuit is to work continuously, fans must be added to dissipate heat, and copper pipes must be water-cooled.
2. Before switching on the power supply, the air switch must be disconnected to prevent burning down the circuit due to slow start of the power supply. The switch can only be turned on for heating after 10 seconds of start of the power supply. Because of the slow start function of high power supply, the low voltage at the beginning of power supply leads to the simultaneous conduction of two MOS transistors and the burning of components.
3. The 40mm circle of package one is the thickest to heat 10mm iron rod, while the 63mm circle of package two is the thickest to heat 20mm iron rod. If the length of the heated rod is less than 20 mm, it can also be heated slightly coarser.
The circuit layout is reasonable, the design is scientific and the performance is excellent, so it is imitated by many sellers. They also attract many people to buy by virtue of the same appearance and low price as our products.Some stores use used parts to dismantle machines to pretend to be brand new.To fool a lot of players. I would like to remind you that before you buy it, you must identify it carefully so as not to be deceived.
=========================================================================
Package 1:Heating circuit, 40 mm inner diameter copper tube heating coil, fan (48V), base, pump, pump power adapter, silica gel tube
Package two:Heating circuit, 63mm inner diameter copper tube heating ring, crucible, fan (48V), base, pump, pump power adapter, silica gel tube
New pumps and adapters:
Fan and base:
Our fan is a high-power fan.When operating at rated power, the wind power is more than 5-10 times that of the cooling fan in the computer case.
[About Heating Circle]
The heating ring is made of 6mm diameter copper tube, which has elegant appearance and excellent performance. By contrast, we know what craftsmanship is.
[Heating Ring Diameter Size]
The default size of package 1 is 40mm, while the default size of package 2 is 63mm.
Below is a picture of the ultra-power melting of molten iron in this circuit. The sparks are everywhere, very explosive.
Note: Hot metal will corrode graphite crucible. After melting several times, the crucible will be corroded through. Friends who want to melt iron will be prepared psychologically.
