Brand Name:icchipcn.com
Condition:New
Type:Voltage Regulator
Model Number:QC4.0 3.0 Mobile Phone Fast Charging Board
Supply Voltage:6V-32V
Dissipation Power:QC4.0 3.0 Mobile Phone Fast Charging Board
is_customized:Yes
Operating Temperature:QC4.0 3.0 Mobile Phone Fast Charging Board
Application:Computer
Package:TQFP

6V-32V QC4.0 3.0 Mobile Phone Fast Charging Board Step-Down Module Quick Charge Converter Module for SCP/FCP

This product uses SW3518S, which supports most mobile phone models on the market! This product is small in size (50*17*12mm), which is more suitable for users to DIY! If matched with a 12-volt power adapter, you can quickly charge your mobile phone, and it can be powered by batteries, solar panels, DC wind generators, etc.! One machine for two purposes! Good helper in outdoor/car/long-term power outages and other occasions!

Feature of product:

A strong compatibility with USB PD3.0 (PPS) to support Qualcomm QC4 + / QC4.0 / QC3.0 support Huawei SCP / FCP support OPPO VOOC support Apple 2.4A support Samsung AFC support DASH support VIVO 9V2A plus a twin-engine flash charge Support MediaTek PE2.0

Support 2. High efficiency and full power Use external MOS tube, two-wire parallel iron-silicon-aluminum magnetic ring, high efficiency, lower heat under the same charging power! ! ! Double parallel low resistance electrolytic capacitors + 6 1206 ceramic capacitors! Only for higher performance! Measured picture: Perfect realization of Huawei's super fast charging 5V4.5A (SCP)

Additional configuration

1. Flexible power supply mode The full protocol fast charging module comes standard with red and black power supply lines. If the shell is selected, the default power supply interface is 5.5mm female socket and standard 5.5 male line! 2. Wide supply voltage: 6 to 35V!

3. High-performance input anti-reverse connection A dedicated MOS tube is used for anti-reverse connection. Although the cost is high, the effect is far better than diodes, and it is not hot! (The calorific value is close to zero)

4. With fast charging status indicator, the blue light is the output indicator, and the red light is the fast charging status indicator!

5. Dual independent current limiting

6. Ultra-thin design, optional shell! 50*17*12mm

Matters needing attention

1. The shell is modified by hand! Be cautious for users who pursue perfect details! The default power supply mode with shell is 5.5mm plug!

2. For low-voltage and high-current fast charging, please use the original data cable. If you want to measure the charging voltage and current, you must use a low internal resistance USB meter! Otherwise it will affect the charging current!

3. TYPE_C port is used for output charging; with C-TO-C/TYPE_C male-to-male dual-head data cable to charge mobile phones or laptops!

4. OPPO and OnePlus phones need to use USB to charge! TYPE_C port must be used for protocols such as QC4+/QC4.0/PD3.0!

5. When the power supply voltage is higher than 21 volts, the C port PD protocol supports up to 20V3A output. The module is small in size. Please ventilate and dissipate it when used in a notebook with PD charging!

6. When the USB port and TYPE_C port are plugged into the mobile phone at the same time, both ports are 5V output!

Multi-brand mobile phone charging test USB port:

1. Charging Huawei Mate20 (56% battery capacity): Turn on SCP fast charging mode, voltage 4.89V, current 4.59A

2. Charging Huawei P20 Pro (12% power): Turn on SCP fast charge mode voltage 5.03V, current 4.25A3, charge Honor V20 (power 43%): Turn on SCP fast charge mode voltage 5.13V, current 4.5A4, charge Xiaomi 8 (Power 18%): Turn on QC3.0 fast charge mode voltage 6.44V, current 2.79A5, charge OPPO R17 (power 43%): Turn on VOOC flash charge mode voltage 4.8V, current 3.8A6, charge iPhone XS (power 5% ): Turn on APPLE2.4A mode voltage 5.22V, current 2.37A 7. Charge one plus 6T (power 15%): Turn on DASH flash charge mode Voltage 4.7V, current 3.8A Type_C port: 1. Charge iPhone XR (power 7%) ): Turn on PD voltage 9.17V, current 1.91A2, charge iPhone X (power 7%): Turn on PD voltage 9.17V, current 1.6A3, charge Mate20Pro (power 55%): Turn on PD voltage 9.20V, current 1.58A4, Charging Huawei P20 Pro (power 10%): Turn on PD voltage 9.17V, current 1.69A5, Charge Honor V20 (power 40%): Turn on PD voltage 9.05V, current 1.7A6, charge Xiaomi Mi 8 (power 6%): Fast start Charging voltage 6.1V, current 2.63A