Brand Name:icchipcn.com
Condition:New
Type:Voltage Regulator
Model Number:DAPLink Emulator Burner Download
Supply Voltage:3.3V-5V
is_customized:Yes
Application:Computer
Package:SMD
DAPLink Emulator Burner Based On CMSIS-DAPLink Download Support For HID Device SWD Keil Replace ST-Link V2 With DuPont Cable
Description:
1. Basic features of the product
(1) LINK developed on the basis of CMSIS-DAPLink
(2) HID device, no need to install driver, support WIN10 system;
(3) Support keil MDK, IAR and other common software IDE;
(4) SWD download mode, compatible with most Arm core chips;
(5) A virtual serial port is provided, which can be used as a USB-to-serial device;
(6) A more concise design scheme is adopted, which greatly reduces the cost;
(7) Metal shell, laser marking, clear interface annotation;
(8)Does not support STM8 series microcontrollers.
2. Product interface definition:
Rx: Virtual serial port receiver
Tx: Virtual serial port sender
SWCLK: SWD clock port
SWDIO: SWD data port
GND: Ground
3.3V: 3.3V power output (maximum providing 250ma current)
3.3V: 3.3V power supply
5V: 5V power output (host USB power supply)
5V: 5V power supply
3. How to use
(1) Take the keil development environment as an example;
(2) Open the program, such as the keil project
Select CMSIS-DAP Debgger in the Dubeg attribute card in the options
Click Setting, you can configure as follows:
It is recommended to download the program after stopping the kernel.
Flash Download option adds flash algorithm library, stm32 corresponds to stm32, and other companies correspond to algorithm libraries provided by other companies. As shown in the figure below, different companies use different algorithm libraries.
(3) Serial port use
Because DAPLink has a virtual serial port and is connected to PA9 and PA10, it can be used directly without additional serial to USB hardware tools, which saves the cost of use and makes it easier to use.
Package Included:
Burner X1
4PIN Dupont Line X1
