DC 5V MICS-5524 Air Quality Gas Sensor Module Carbon Monoxide Hydrogen Methane Monitoring Gas Sensor Detection Board

DC 5V MICS-5524 Air Quality Gas Sensor Module Carbon Monoxide Hydrogen Methane Monitoring Gas Sensor Detection Board

Price: $6.14

Model: icchipcn0004306
Shipping Weight: 0.1kg
9999 Units in Stock

(0 reviews)

(complete orders today,deliverd around 18/04/2025)

Shipping time

Shipping Worldwide.About 5-15 days.

means of transportation

EMS,DHL,FEDEX,HK Post

Payment

Paypal,T T,

Email us

[email protected]

New Products

Wired DHT22AM2302 Digital Temperature and Humidity Sensor AM2302

$3.43

XH-M542 TDA3116D2 digital power amplifier board 100W high power mono audio amplifier module

$3.00

5V 3.3V SIM800C GSM GPRS Electronic PCB Board Module TTL Development Board IPEX With for Bluetooth TTS STM32 For Arduino C51

$3.03

Compatible For j-link OB ARM simulation debugger SWD programmer STM32 download Jlink generation V8

$3.05

Details
Reviews
Tags
FAQ

Brand Name:icchipcn.com
Output:Digital Sensor
Model Number:MICS-5524
Type:Gas Sensor
is_customized:Yes
Material:Mixture
Usage:Gas Sensor

DC 5V MICS-5524 Air Quality Gas Sensor Module Carbon Monoxide Hydrogen Methane Monitoring Gas Sensor Detection Board

Give your next sensor project a nose for gasses with the MiCS-5524 Gas Sensor Breakout. This breakout makes it easy to use this nice sensor . The MiCS-5524 is a robust sensor for indoor carbon monoxide and natural gas leakage detection, it's suitable also for indoor air quality monitoring; breath checker and early fire detection.

Please note: This sensor is sensitive to CO ( ~ 1 to 1000 ppm), Ammonia (~ 1 to 500 ppm), Ethanol (~ 10 to 500 ppm), H2 (~ 1 - 1000 ppm), and Methane / Propane / Iso-Butane (~ 1,000++ ppm). However, it can't tell you which gas it has detected.

This breakout board is not for any safety, medical or finished product usage. We're selling it for hobby education & experimentation and don't guarantee it for any other purpose! All gas sensors require calibration for precision output.

Using it is easy: Power it with 5V DC and read the analog voltage off of the output pin. When gasses are detected, the analog voltage will increase in proportion of detected gas. When powered, the heater draws about 25-35mA. You can use the EN pin to power it off (pull it high to 5V to turn off) to conserve energy. Just make sure to wait a second after turning the heater on to make sure its all heated before taking readings.

Each order comes with one assembled and tested MiCS-5524 breakout and a bit of header. You'll need to do some light soldering to attach the header on - or you can use just plain wires.

Similar Products

2Pcs 100CM 1M NTC 10K 1% 3950 Thermistor Waterproof Accuracy...

$0.50

DC 12V 40V ZVS Induction Heating Machine Module Machine Board 50A...

$31.33

Solar Light Ceiling Light Replacement Led Module 3.2V 3.7V Led Panel...

$2.70

328Pcs Polyolefin Heat Shrinkable Tubing 2:1 Shrinkable Casing Wire 8...

$0.89

12V 24V Stainless Steel Self-priming Pump Electric Oil Pump Dispenser...

$8.47

DC 4.2-5V Black Bluetooth Speaker DIY Kit 3W+3W 2 Channels Speaker...

$5.21

DC8-30V USB Type-C Lead Acid Lithium Battery Charge Capacity...

$5.64

HFS-DC06 Microwave Radar Sensor Switch Module DC 5V 5.8G 5.8GHz ISM...

$4.37

DC 5V MICS-5524 Air Quality Gas Sensor Module Carbon Monoxide Hydrogen Methane Monitoring Gas Sensor Detection Board

Price: $6.14

DC 5V MICS-5524 Air Quality Gas Sensor Module Carbon Monoxide Hydrogen Methane Monitoring Gas Sensor Detection Board

Please note: This sensor is sensitive to CO ( ~ 1 to 1000 ppm), Ammonia (~ 1 to 500 ppm), Ethanol (~ 10 to 500 ppm), H2 (~ 1 - 1000 ppm), and Methane / Propane / Iso-Butane (~ 1,000++ ppm). However, it can't tell you which gas it has detected.

This breakout board is not for any safety, medical or finished product usage. We're selling it for hobby education & experimentation and don't guarantee it for any other purpose! All gas sensors require calibration for precision output.

Each order comes with one assembled and tested MiCS-5524 breakout and a bit of header. You'll need to do some light soldering to attach the header on - or you can use just plain wires.

Add you Tags