Brand Name:icchipcn.com
Condition:New
Type:Drive IC
Model Number:GT-T8
Supply Voltage:9V
is_customized:Yes
Package:TQFP
Support dropshipping and wholesaling.
100% Original and with free after-sale warranty.
Product selling point:
1. Made of high-quality materials, the LCD screen is a low-power backlight screen, durable and practical.
2. The microcontroller adopts 8MHz external crystal oscillator, and the measurement accuracy is better.
3. The relevant resistances that affect the accuracy use one-thousandth metal film resistors, and the rest also use one-hundredth of metal film resistors.
4. The LCD adopts 12864 liquid crystal screen, which can display measurement data and graphics at the same time. Clearer fonts and displays.
5. Use in-line components.
Parameter:
Working current: when the voltage is 9V, the stable working current is about 20mA
Technical performance:
It can automatically detect NPN, PNP bipolar transistors, N-channel and P-channel MOS field effect transistors, junction field effect transistors, diodes, double diodes, low-power unidirectional thyristors and bidirectional thyristors. Automatically identify the pin layout of components.
Measure the current amplification factor and base-emitter threshold voltage of bipolar transistors.
Darlington transistors can be identified by their base-emitter threshold voltage and high current amplification factor.
The protection diodes of bipolar transistors and MOS tubes can be detected.
Measure the gate threshold voltage and gate capacitance of the MOS FET.
Two resistances can be measured simultaneously and displayed with the resistance symbol. Displays 4-digit values with decimals on the right. The pin numbers are displayed on both sides of the resistor symbol. So the potentiometer can be measured. If the potentiometer wiper is not adjusted to a certain extreme position, the middle and end pins can be distinguished.
The resolution of resistance measurement is 0.1 ohms and can measure up to 50M ohms.
Capacitance can be measured. It is displayed with the capacitance symbol, and the value is displayed on the right side, and the value with 4 decimal places can be displayed. Capacitance of 30pF-100mF can be measured with a resolution of 1pF.
Capacitors above 2uF can measure the ESR value of the equivalent series resistance at the same time. Can display two-digit values with decimals with a resolution of 0.01 ohms.
Two diodes can be displayed in the correct order and diode symbol, while giving the forward voltage of the diodes.
The LED is detected as a diode, which has a higher forward voltage. A 2-in-1 LED is identified as two diodes.
Zener diodes with reverse breakdown voltage below 4.5V can be identified.
The reverse capacitance of a single diode can be measured. The reverse capacitance of the collector or emitter junction can also be measured if the base of the bipolar transistor is connected to a pin of the collector or emitter.
Only one measurement is needed to get the connection of the rectifier bridge.
Although the lower limit for capacitance measurement is 25pF, you can obtain the desired result by connecting the measured capacitance in parallel with a capacitance of known capacitance of at least 25pF, and then subtracting the parallel capacitance from the measurement.
Extended function (selected by menu, and users may need to add a few components, suitable for DIY)
1. Can measure 1Hz-2MHz frequency. The resolution above 25kHz is 1Hz, and the low frequency is measured periodically, and the resolution can reach 0.001MmHz.
2. It can measure DC voltage below 50V.
3. Can generate 1Hz-2MHz square wave signal.
4. It can generate pulse waves with fixed frequency but variable pulse width. The width of short keys is incremented by 1%, and the width of long keys is incremented by 10%.
5. The individual capacitance and ESR functions can be activated through the menu, with a range of 2UuF-50mF. Since the measurement signal amplitude is only 300mV, it can be measured on the road. (Annotation: Due to non-4-wire measurement, measuring lead resistance may bring large errors, especially for small ESR measurements).
6. A rotary coding switch can be added to facilitate menu item selection.
Special attention: Before measuring the capacitance, the capacitance must be discharged, otherwise the instrument may be damaged.
Package Contents:
