Brand Name:icchipcn.com
Condition:New
Type:Voltage Regulator
High power: 4000W (resistive load limit power), long time should reduce the power use, recommended room temperature resistive load within 2000W (key parameters, please pay attention to).
The voltage range of 4000W voltage regulator can be adjusted smoothly from 10V-220V, which is more suitable for industrial enterprises that need low voltage to drive heating wire.
Specifications:
Product name: 4000W AC voltage regulator
SCR model: BTA41600B
Size: length 85* width 55* height 38mm, knob inner hole 6mm.
High power: 4000W (resistive load limit power), long time should reduce the power use.
Efficiency: over 90%
Working voltage: AC 220V
Regulating voltage: AC 10-220V
Note that the load must be connected before regulating the voltage.
SCR is mainly used for resistive load (electric heating wire incandescent lamp, etc.), single-phase AC motor can also be mostly, but not guaranteed, other types of load please confirm by the buyer. Fuses are not. They have reaction time. If the current is too high, in addition to blowing out the fuses, the module could also blow out.
Note that the plastic cover on the joint can not be completely opened due to the installation of the shell, the screwdriver should be twisted slightly, in addition, be careful when opening, too much force is easy to break the cover, express transportation may be crushed, vulnerable parts, but it will not affect the use of the module, all plastic cover related problems the shop will not be responsible for return or replacement.
Interior pictures:
Voltage regulator size: length 85mm* width 55mm* height 35mm
The regulator with enclosure and fuse is safer, more convenient to install, more suitable for families and inconvenient installation of factories and enterprises.
Use the original imported 41A thyristor.
Using 1.6 thick FR-4 high temperature resistant circuit board, the circuit design is reasonable, and adopts the design of increasing and thickening welding path, even if the high current is enough to cope with, the use of safer and more reliable.
Use standard 35A 4-position terminal, so that 4000W design. (Two in and two out more convenient wiring).
Circuit after many times of technical improvement, select every part, is now fully mature technology. Adopt double capacitor design (safety capacitor + metal film capacitor) to absorb surge and voltage tip effectively, protect SCR more effectively, use efficiency is higher and safer.
External use 1.5 thick aluminum plate and stainless steel die stamping molding, beautiful and generous, more suitable for family temperature regulation and industrial enterprises use! Beautiful and generous, safe, convenient, high quality products, from time to time general bare plate regulator can be compared. No matter how long you use it, it won't rust and other appearance problems.
