I2C SMBUS INA3221 Triple-Channel Shunt Current Power Supply Voltage Monitor Sensor Board Module Replace INA219 With Pins

I2C SMBUS INA3221 Triple-Channel Shunt Current Power Supply Voltage Monitor Sensor Board Module Replace INA219 With Pins

Price: $1.15

Model: icchipcn0006631
Shipping Weight: 0.1kg
9999 Units in Stock

(0 reviews)

Please Choose:

Option

Black
purple

(complete orders today,deliverd around 26/04/2025)

Shipping time

Shipping Worldwide.About 5-15 days.

means of transportation

EMS,DHL,FEDEX,HK Post

Payment

Paypal,T T,

Email us

[email protected]

New Products

RS232 to RS485RS232 converter communication lightning protection active isolation type

$25.96

Bile Machine 1A2+2P2 Two-lamp DC Ear Amplifier Single-lamp Ear Amplifier Microtube Power Amplifier DIY kits

$34.39

VVDI Super Chip XT27A01 Xhorse XT27A66 Transponder for ID4640434D8C8AT347 for VVDI2 VVDI Key ToolMini Key Tool

$39.07

10pcs Xhorse VVDI Super Chip XT27B Add ID46ID47 ElectricID49MQB Types Transponder Update XT27 XT27A01 for VVDI2 Key Tool max

$90.00

Details
Reviews
Tags
FAQ

Brand Name:icchipcn.com
Condition:New
Type:Voltage Regulator
Model Number:MW
Supply Voltage:1
Dissipation Power:1
is_customized:Yes
Application:Computer

I2C SMBUS INA3221 Triple-Channel Shunt Current Power Supply Voltage Monitor Sensor Board Module Replace INA219 With Pins

The INA3221 is a three-channel, high-side current and bus voltage monitor with an I2C- and SMBUScompatible interface. The INA3221 monitors both shunt voltage drops and bus supply voltages, in addition to having programmable conversion times and averaging modes for these signals. The INA3221 offers both critical and warning alerts to detect multiple programmable out-of-range conditions for each channel.
The INA3221 senses current on buses that can vary from 0 V to 26 V. The device is powered from a single 2.7-V to 5.5-V supply, and draws 350 uA (typ)of supply current. The INA3221 is specified over the operating temperature range of -40°C to +125°C.
The I2C- and SMBUS-compatible interface features four programmable addresses.1. Triple-Channel with different bus voltage.
2. 0.1 ohm 1% 2W current sense resistor.
3. Up to +26V target voltage, with ±8mV resolution.
4. Up to ±1.638A current measurement, with ±0.4mA resolution.
5. Dimension: 38*32 mm.
6. PCB (no header or terminal block): 4.4g.
7. This board/chip uses I2C 7-bit addresses 0x40, 0x41, 0x44, 0x45, selectable with jumpers.